The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
+48 607404319 | +48 713735340 |
biuro@woronko-kleje.pl
+48 607 404 319
+48 71 3735340
Start
Contact
Certifications
About Company
Assortment
Brand
You are here:
Dispensers and dosing systems
Dispensers and dosing systems
Display mode:
list
thumbnails
LOCTITE 97115 (electric rotorspray used to apply anaerobic products to the internal cylindrical surfaces) (IDH.135557)
LOCTITE PU20 1.6 Tip Adapter (18mm x 1.6mm (OD) tip for Loctite PU20 Applicator Assembly) (IDH.2737714)
LOCTITE PU20 2.0 Tip Adapter (18mm x 2.0mm (OD) tip for Loctite PU20 Applicator Assembly) (IDH.2737715)
LOCTITE PU20 2.5 Tip Adapter (18mm x 2.5mm (OD) tip for Loctite PU20 Applicator Assembly) (IDH.2737716)
Syringe Air Line Adapter 30 ml (2 pcs) (IDH.88678)
LOCTITE PU20 3.2 Tip Adapter (18mm x 3.2mm (OD) tip for Loctite PU20 Applicator Assembly) (IDH.2737717)
LOCTITE 97956 (adapter for double (1:1) 50ml cartridges, compatible with standard 300ml cartridge squeezers) (IDH.476895A)
LOCTITE 97956 1:1 Adapter for 50 ml double cartridges (10 pcs / set) (IDH.476895)
LOCTITE PU20 Applicator Assembly 18mm (pen-type applicator for use with the Loctite PU20 dispenser) (IDH.2737712)
LOCTITE BPD Applicator Assembly (pen-type applicator for Loctite 98548 dispensing system) (IDH.1244445)
LOCTITE 97239 (Shut-Off Valve Assembly, 1/4 inch feedline (97113)) (IDH.88674)
LOCTITE 97240 (Shut-Off Valve Assembly 3/8 inch Feedline (LOCTITE 97114)) (IDH.142733)
LOCTITE 97291 (Actuator Assembly for 97113/97114 Valve) (IDH.505721)
LOCTITE 97001 (Peristaltic hand dispenser (97001), dedicated to anaerobic adhesives in 50ml and 250ml bottles) (IDH.88631)
LOCTITE Pro Pump Handheld Dispenser for bottles 50ml & 250ml (IDH.2564842)
Mixing Nozzle Static Mixer CB ID6.5 EL20 4/10, Type No. 1034575 (IDH.1034575A)
Mixing Nozzle Static Mixer MLX 2.5-16-S, 4:1/10:1 TP Type No. 8955989 (10 pcs.) (IDH.1453183)
Mixing Nozzle Static Mixer MLX 2.5-16-S, 4:1/10:1 TP Type No. 8955989 (IDH.1453183A)
Mixing Nozzle Static Mixer MBX3.2-16-S, Type No. 8957509 (10 pcs.) (IDH.1509102)
Mixing nozzle Stat Mixer MBHX 03-16S, Type No. 8957509 (IDH.1509102A)
Mixing Nozzle Static Mixer CA ID5.4 EL7T 1/2 (10 pcs./set) (IDH.1646832)
Mixing Nozzle Static Mixer for LOCTITE HY 4090-400ml, 10 pcs. (IDH.1573135)
Mixing Nozzle EQ Static Mix 3.2 mm B16E 1/2 (10 pcs.) (IDH.1826921)
Mixing Nozzle EQ Static Mix 3.2 mm B16E 1/2 (IDH.1826921A)
Mixing Nozzle MC 10-24-A (mixer for LOCTITE PC 7352) 10 pcs. (IDH.639381)
Mixing Nozzle MC 10-24-A (mixer for LOCTITE PC 7352) (IDH.639381A)
Mixing Nozzle Static Mixer 7.5-24 1:1 and 2:1 Type No. 984570 (for 400ml/200ml cartridges, 10pcs.) (IDH.1487439)
Mixing Nozzle Static Mixer 7.5-24 1:1 and 2:1 Type No. 984570 (for 200ml/400ml cartridges) (IDH.1487439A)
TEROSON ET QUAD ST MIX SMALL (for 50 ml cartridges 1:1, 1:2) (IDH.2900614)
Mixing nozzle STATMIX red (for 50 ml cartridges 1:1, 1:2) (10 pcs / set) (IDH.1487440)
STATMIX mixing nozzle green (for 50 ml cartridges 1: 1, 1: 2) (12 pcs / set) (IDH.142242)
Mixing nozzle STATMIX red (for 50 ml cartridges 1:1, 1:2) (IDH.1487440A)
Mixing nozzle TEROSON ET 6700 statmix small (for 50 ml cartridges) (IDH.142242A)
Mixing nozzle TEROSON ET QUAD Static Mixer (10pcs) (IDH.780805)
TEROSON ET QUAD Static Mixer mixing nozzle (IDH.780805A)
STATICMIXER MFQ 07-18C-06 (Loctite 200ml, 400ml cartridges F-style Square Mix Nozzle, 10 pcs.) (IDH.2285171)
Mixing Nozzle Static Mixer MC08-24 1:1 and 2:1 Type No. 98457 for 400ml cartridges 10pcs. (IDH.720174)
Mixing Nozzle Static Mixer MC08-24 1:1 and 2:1 Type No. 98457 for 400ml catridges (IDH.720174A)
Nozzle for TST-8597-570 ml (51x120 mm) (IDH.582416)
LOCTITE HD 12 Pneumatic Spray Dispenser (dual cartridge pneumatic handgun for dispensing sprayable ceramic coatings) (IDH.2251591)
LOCTITE RC30 Manual Reservoir (manual reservoir for dispensing Loctite adhesives using the Vari-Drop valve) (IDH.2814022)
LOCTITE EQ RC34 Automatic Reservoir DP (automatic reservoir with analog low product level sensor) (IDH.2830690)
LOCTITE RC40 (semi-automatic integrated dispenser) (IDH.2814025)
LOCTITE 97120 set (10 micron air filter + regulator with fixing clamp + gauge) (IDH.88649)
LOCTITE dispensing needle 0.5 mm (IDH.1365504A)
LOCTITE 97221 (PPC 16 dispensing needle, gray, 1.2 mm (50pcs / pack)) (IDH.88660)
LOCTITE 97222 (PPC 18 dispensing needle, green, 0.84 mm (50 pcs/pack)) (IDH.88661)
LOCTITE 97224 (PPC 22 dispensing needle, blue, (50 pcs / pack)) (IDH.88663)
LOCTITE 97229, PPF 15 dispensing needle, amber (50 pcs / pack) (IDH.142640)
LOCTITE 97230 (PPF 18 dispensing needle, green, (50 pcs / pack)) (IDH.142641)
LOCTITE 97231 (PPF 20 dispensing needle, pink (50 pcs / pack)) (IDH.142642)
LOCTITE 97232 (PPF 25 dispensing needle, red (50 pcs / pack)) (IDH.142643)
LOCTITE 97225 (SSS 15 dispensing needle, amber, 1.37 mm (50 pcs / pack)) (IDH.88664)
LOCTITE 97226 (SSS 18 dispensing needle, green (50 pcs / pack)) (IDH.88665)
LOCTITE 97228 (SSS 25 dispensing needle, red (50 pcs / pack)) (IDH.88667)
LOCTITE 1506479 (replacement fluid element assembly designed for use with the CA adhesive volumetric hand pump Loctite 1506477) (IDH.1506479)
LOCTITE EQ HD 14 200ml 2K (manual dispenser for 2K cartridges) (IDH.2693822)
LOCTITE EQ HD 14 400ml 2K (manual dispenser for 2K cartridges) (IDH.2693823)
LOCTITE EQ HD 14 200ml 2K (pneumatic dispenser for 2K cartridges) (IDH.2693824)
LOCTITE EQ HD 14 400ml 2K (pneumatic dispenser for 2K cartridges) (IDH.2693825)
LOCTITE 8901070 (dedicated manual applicator for LOCTITE AA 3038 50ml, mixing ratio of components A&B 10:1) (IDH.1034026)
LOCTITE Universal Fixmaster Dispenser 200ml, 400ml, 490ml, manual gun (IDH.1372751)
LOCTITE 96003 (200ml dual cartridge manual applicator, the mixing ratio of components A & B is 1:1 or 1:2) (IDH.267453)
TEROSON ET MULTIPRESS (air gun for applying seams and spraying low and medium viscosity sealing products) (IDH.142241)
LOCTITE 97002 (Catridge Pneumatic Dispenser 300ml) (IDH.88632)
LOCTITE 97042, 50 ml Dual Catridge Pneumatic Applicator (1:1, 1:2) (IDH.476898)
LOCTITE 983437 (pneumatic gun for dispensing double 200ml cartridges (1:1/2:1) equipped with an integrated pressure regulator) (IDH.218315)
LOCTITE 983439 (pneumatic gun for dispensing double 400ml cartridges (1:1/2:1) equipped with an integrated pressure regulator) (IDH.218311)
LOCTITE 985249 (pneumatic gun for double cartridges 490ml, mixing ratio 10:1) (IDH.470572)
TEROSON ET POWERLINE II (high pressure pneumatic gun for dispensing continuous beads from low to high viscosity products) (IDH.960304)
LOCTITE 98815 (handheld manual 30ml syringe dispenser) (IDH.1544934)
LOCTITE 1.6 x 1.0 BPDF CR (transparent PTFE feedline for peristaltic dispensers, parameters: 1.6 mm (OD), 1.0 mm (ID), 20m) (IDH.1087219)
LOCTITE 97972 (black, 1/4", 10mtr polyethylene-teflon hose used for supplying fluids to Loctite dispense valves) (IDH.142646)
LOCTITE 97970 (black, 3/8", 10m polyethylene-teflon hose for Loctite dispensing valves) (IDH.142645)
LOCTITE 2.5 x 1.7 BPDF CR (transparent PTFE feedline for peristaltic dispensers, parameters: 2,5 mm (OD), 1,7 mm (ID), 20m) (IDH.1109317)
LOCTITE 97233 (Luer-Lok, Adapter Kit (20 Luer-Loks, 5 Adapters)) (IDH.88672)
LOCTITE Reservoir Tank Fitting (6mm (1/4") NPT hose connector for Loctite Semi-Automatic Dispense Systems and Controllers) (IDH.360636)
LOCTITE PU20 Pump Head (pump head for Loctite PU20 dispenser) (IDH.2737713)
LOCTITE Pulse RC50 (semi-automatic integrated dispenser compliant with Industry 4.0 standards) (IDH.2814024)
LOCTITE 97259 (25mm rotor disc) (IDH.195870)
LOCTITE Rotor Disc 30 (30mm diameter rotor disc for use with Loctite Rotorspray) (IDH.529533)
LOCTITE Rotor Head with 3mm shaft (głowica wirnika z wałem 3 mm do stosowania z Loctite Rotorspray / rotor head with 3mm shaft for use with Loctite Rotorspray) (IDH.187587)
LOCTITE 97144 (rotorspray) (IDH.527593)
LOCTITE 97118 (advancing slide with a pitch of 50mm (moving, two-stage, cylindrical, two-piston guide + fastening clamp)) (IDH.142636)
LOCTITE 97102 (integrated semi-automatic controller, it also controls the pneumatic operation of the valve and the dosing time) (IDH.135550)
LOCTITE 98666 (pneumatic, semi-automatic syringe controller with analog pressure regulation) (IDH.883976)
LOCTITE 97152 (automatic, dual channel digital multifunction controller to actuate 1-2 dispensing valves and peripheral devices) (IDH.1275665)
LOCTITE 97211 (pre-amp on-line monitor) (IDH.215992)
LOCTITE 98501 (holder for a pen or syringe applicators) (IDH.928058)
LOCTITE 97207 (colorless syringe 10ml/40pcs) (IDH.88656)
LOCTITE 97244 (colorless syringe 30ml/20pcs) (IDH.88677)
LOCTITE 97006 (digital syringe controller) (IDH.88633)
LOCTITE 97070 (the LED flood cure system for curing UV adhesives using UVA or UVV light) (IDH.1427234)
LOCTITE 98548 (precise, semi-automatic peristaltic dispenser) (IDH.769914)
LOCTITE 97009, Integrated Semi-Automatic Dispensing System (8 bar) (IDH.215845)
LOCTITE PU20 (precise, semi-automatic, digital peristaltic dispenser) (IDH.2265279)
LOCTITE 97293, Finger Switch for 97112 / 97121 / 97130 Applicator (IDH.531803)
LOCTITE 97201 (footswitch to initiate dispensing actions in most Loctite controllers) (IDH.88653)
LOCTITE 97236 finger switch for valves 97112 / 97121 / 97130 (IDH.142644)
LOCTITE Syringe Barrel Tip Caps (orange, one size fits all, polyethylene tip caps screw onto the syringe nozzle to seal it, 50pcs) (IDH.218275)
LOCTITE 97112 (pneumatic hand valve (FLEX) with suction function, controlled by foot or hand switch) (IDH.88643)
LOCTITE 97113 (stationary, precise dispense valve with suction function and 1/4" connection for low or medium viscosity products) (IDH.88644)
LOCTITE 97114 (stationary, precise dispense valve with suction function and 3/8" connection for high viscosity products) (IDH.88645)
LOCTITE 97121 (single-acting pinch valve, with spring-assisted closing) (IDH.88650)
LOCTITE 97130, ErgoLOC Valve (pneumatic, hand held dispense valve for pressure-time systems, compatible with low viscosity adhesives) (IDH.444643)
LOCTITE VARI-DROP (manually controlled valve with 0.25' PTFE tube, dispense adhesive in form of tiny drops up to heavy beads) (IDH.194420)
LOCTITE 97135 (pneumatic dispense valve with 2mm diameter PTFE floating diaphragm for low viscosity anaerobic and acrylic adhesives) (IDH.215846)
LOCTITE 97136 (pneumatic dispense valve with 2mm PTFE floating diaphragm for low, medium viscosity anaerobic and acrylic adhesives) (IDH.215848)
LOCTITE 97138 (diaphragm dispense valve with flow sensor, use with Loctite 97211 on-line monitor and LOCTITE 97152 controller) (IDH.1147046 )
LOCTITE 98009 (precise diaphragm valve with constant flow control dedicated to dispensing low and medium viscosity UV adhesives) (IDH.218280)
LOCTITE 98013 (Precise diaphragm valve with constant flow control, dedicated to dispensing low and medium viscosity adhesives) (IDH.318654)
TEROSON ET PRESSURE REG (main valve for Teroson Multipress) (IDH.205195)
LOCTITE 97108 - 2 litre Reservoir (tank equipped with a pneumatic connection and an electrical interface with an analog fillimg indicator) (IDH.135555)
LOCTITE 97124 (dyspenser do klejów i uszczelniaczy anaerobowych w 2 litrowych workach / 2 litre bag dispenser for anaerobic adhesives and sealants) (IDH.360442)
LOCTITE 97217 (Loctite 97121 valve repair kit (d=1.7mm, black PTFE tube) (IDH.114348)
LOCTITE 97262 (Needle Tip Variety Kit, 30 pcs, 2 of each type) (IDH.218288)
LOCTITE 97271 (repair kit (diaphragm replacement kit) for valves 97135 / 97136 ) (IDH.360444)
LOCTITE 984684 (repair kit (diaphragm valve head, male elbow fitting, tip adapter) for Loctite 98009 diaphragm valve) (IDH.478567)
LOCTITE 984685 (repair kit (diaphragm, valve head, male elbow fitting, tip adapter) for Loctite 98013 diaphragm valve) (IDH.478568)
LOCTITE 97218 Pinch Valve Feed Line Kit (Loctite 97121 valve repair kit (d=2.4mm, black PTFE tube)) (IDH.105613)
LOCTITE UVALOC 250 SSA (light source for Loctite 97053 UV lamp) (IDH.1002233)
Spray nozzle 547882 (IDH.547882)
TEROSON ET Flex sealant nozzle (M15 nozzle for Terostat II) (IDH.368243)
TEROSON ET Flatstream Nozzle (flat jet nozzle), (10 pcs/set) (IDH.1305486)
TEROSON ET Flatstr Nozzle (flat jet nozzle) (IDH.1305486A)
TEROSON ET Widestream Nozzle (10 pcs) (IDH.1470999)
TEROSON ET Widestr Nozzle (wide jet nozzle) (IDH.1470999A)
LOCTITE 96001 (manual applicator for 50ml cartridges, mixing ratio of components A&B 1:1 or 1:2) (IDH.267452)
TEROSON ET HAND GUN 570 (manual gun for dispensing from plastic and aluminum cartridges 290-310ml and soft packaging 570-600ml) (IDH.150339)
TEROSON ET Battery Gun 2.0 (cartridges 310 ml, foil 400ml) (IDH.2085724)
TEROSON UBC pneumatic dispenser with reg. nozzle (for underbody protective coati (IDH.1585815)
TEROSON UBC Pneumatic Dispenser with Reservoir (for underbody protection coating (IDH.1589356)
TEROSON Soft Press Handheld Pneumatic Applicator (pneumatic gun for high-viscosity adhesives and sealants, adapted to soft packagings) (IDH.250052)
TEROSON STAKU (manual dispenser for 300ml cartridges) (IDH.142240)
Pneumatic Dispenser TEROSON to closed profiles (IDH.1589354)
Assortment
Threadlockers
Low-strength anaerobic threadlockers
Low-strength anaerobic threadlockers up to M12
Low-strength anaerobic threadlockers up to M36
Medium-strength anaerobic threadlockers
Medium-strength anaerobic threadlockers up to M12
Medium-strength anaerobic threadlockers up to M36
Medium-strength anaerobic threadlockers up to M50 (stick)
Medium-strength anaerobic threadlockers up to M80
High-strength anaerobic threadlockers
High-stregth anaerobic threadlockers up to M12
High-strength anaerobic threadlockers up to M20
High-strength anaerobic threadlockers up to M36
High-strength anaerobic threadlocker up to M50 (stick)
High strength anaerobic threadlockers up to M80
Thread sealants
Anaerobic sealants for metal threads
Anaerobic thread sealants up to 3/4"
Anaerobic thread sealants up to 2"
Anaerobic thread sealants up to 3"
Sealants for plastic and metal threads
Silicone sealant for plastic threads
Sealing cord for metal and plastic threads
Flange sealants
Anaerobic sealants for rigid flanges
Anaerobic sealants for rigid flanges with gap up to 0,10 mm
Anaerobic sealants for rigid flanges with gap up to 0,25 mm
Anaerobic sealants for rigid flanges with gap up to 0,30 mm
Silicone flange sealants
Sealants for sealing permanent seals
Retaining compounds
Medium-strength anaerobic products for bonding cylindrical fitting parts
Gap up to 0,1mm, temp. up to 150°C
High-strength anaerobic products for bonding cylindrical fitting parts
Gap up to 0,1 mm, temp. up to 150°C
Gap up to 0,15 mm, temp. up to 180°C
Gap up to 0,2 mm, temp. up to 230°C
Gap up to 0,25 mm, temp. up to 180°C
Gap up to 0,5 mm (with activator LOCTITE SF 7649 or 7471), temp. up to 150°C
Adhesives
Hybrid adhesives
Reinforced hybrid adhesives for general purpose
Hybrid adhesives for maintenance and service
Epoxy adhesives
General purpose epoxy adhesives
"Five-minute" epoxy adhesives
Strengthened epoxy adhesives
High temperature epoxy adhesives
Epoxy adhesives with metal filler
Acrylic adhesives
Acrylic adhesives for plastics
Acrylic adhesives for metals
Acrylic adhesives for glass
Acrylic adhesives for magnets
High temperature resistant acrylic adhesives
Acrylic adhesives for polypropylene (PP) and polyethylene (PE)
Acrylic emulsion for plastic bags and pouches
Polyurethane adhesives
One-component polyurethane adhesives
Two-component polyurethane adhesives
Instant adhesives
Instant adhesives for general purposes
Instant adhesives for plastics and rubber
Instant adhesives for metals
Reinforced instant adhesives
Elastic instant adhesives
Instant adhesives for difficult-to-bond plastics (PP, PE, PTFE) and silicone rubber
Instant adhesives with increased temperature resistant
Odourless instant adhesives with low efflorescence
Instant adhesives for large gaps
Instant adhesives with additional UV curing system
Low-strength instant adhesive for locking metal and plastic fasteners
Instant adhesives with very low viscosity
UV adhesives
Solvent-based adhesives
Water-based adhesives
Hot melt adhesives
Adhesives based on silane-modified polymers
MS-Polymer one-component adhesives
MS-Polymer two-component adhesives
Silicone adhesives
One-component silicone adhesives
Two-component silicone adhesives
Sealants
Sealants based on silane-modified polymers
Silicone sealants
Polyurethane sealants
Butyl rubber sealants
Synthetic rubber sealants
Butyl rubber sealing cords and tapes
Synthetic rubber sealing cords and tapes
Primers and activators
Activators
Anaerobic adhesives activators
Instant adhesives activators
Acrylic adhesives activators
Activator for car glass adhesives and ceramic coatings
Primers
Conversion coating
Degreasers and cleaners
Products for surface preparation before bonding and sealing applications
Electrical contact cleaner
Brake cleaner
Cleaner for supply systems
Sealant, adhesive and varnish remover
Product for cleaning hoses in dosing systems
Dashboards and windscreens cleaning products
Hand cleaners
Maintenance cleaners
Pouring and filling compounds
Epoxy resins
Polyurethane masses
Products for surface repair and reconstruction, protection coatings
Repair resins with metal fillers
Repair and protection resins with ceramic fillers
Protective coating based on polysulfide-modified resin
Ceramic protection coating in spray
Elastic repair material based on polyurethane
Oils, lubricants and anti-seize pastes
Anti-Seize pastes
Lubricants
Dry lubricating coatings
Lubricating oils
Penetrating oils
Coolants and cutting oils
Emergency repairs products
Gas and pneumatic system leak detector
Pipe leaks repair
Repair of cavities and defects on conveyor belts, transport belts and rubber parts
Replacing or fixing O-ring seals
Repair Tapes
Filling cavities on surfaces
Corrosion protection
Quick bonding
Other
Chocking system and concrete regeneration
Epoxy chocking system
Magnesium phosphate based fast-curing product for repairing and rebuilding concrete surfaces
Anti-slip coatings
Pipe repair systems
Pipe repair system
Pipe repair kit
Acoustic coatings and soundproofing
Soundproofing mats
Soundproofing foams
Soundproofing masses
Products for bonding, sealing and marking electronic components
Epoxy adhesives
Acrylic adhesives
Silicones
Marking ink
Products for windshield and window bonding and repair
Adhesives for windshield and window pasting
Primers for windshield and window adhesives
Rear window heater repair kit
Rearview mirror adhesive
Chip repair kit
Windscreen removal system
Glass cleaners
Ancillary products
Products for vehicle body repair
Bonding - repair of vehicle bodies
Metal repairs
Seam sealing
Plastic repair
Body fillers
TEROSON PREMIUM LINE polishing systems
Products for vehicle body protection
Anti-splinter coatings
Chassis coatings
Closed profile maintenance
Soundproofing
Dispensers and dosing systems
Dispensers
Manual dispensers
Pneumatic dispensers
Electric dispensers
Mixing nozzles
Dispensing needles
Flexible dispensing tips (PPF)
Conical dosing tips (PPC)
Stainless steel dispensing tips (SSS)
Polypropylene (PP) needles
Semi-automatic dispensing equipment
Controllers
Tanks
Dispense valves
Peristaltic dispensers
Equipment
Accessories
Products with approval
NSF approval (Nonfood Compounds Registration Program)
H1
H2
K1
P1
S6
WRAS approval (potable water)
DVGW approval (gas)
BAM approval (oxygen)
Biocompability approval (medical devices)
Fire resistance approval
Brand
LOCTITE
TEROSON
BONDERITE
Zostałeś zalogowany jako: :
(
)
Edytuj
Kontynuuj zakupy
Historia zamówień
Log out
Log in
Login:
Password:
Nie pamiętasz hasła?