Try to find the solution
BONDERITE M-NT NC-100 - 0,1kg (MOQ: 2,323kg) / (środek do natryskiwania i wycierania bez spłukiwania, przeznaczony do po
No.
IDH.1045571
BONDERITE M-NT NC-100 - 0,1kg (MOQ: 2,323kg) / (środek do natryskiwania i wycierania bez spłukiwania, przeznaczony do po
Product description:
BONDERITE M-NT NC-100 is a no-rinse treatment in sprayand wipe application for aluminium, zinc, zinc alloy and cold rolled steel surfaces.
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Application:
Spray product on surface and disperse by brush or cloth. Treatment time, sec >1 Temperature, °C 20 to 40 pH-value 2.4 ± 0.5 Density, g/m³ 1.01 ± 0.02
Drying:
Allow the surface to evaporate till it is visually dry.
Caution:
BONDERITE M-NT NC-100 contains complex fluoride compounds.
Storage:
Recommended Storage Temperature, °C : 5 to 50 Shelf life, months (in unopened original packaging) : 12
Parameters:
Technology : Surface treatment Product Type : Conversion coating Application : No-rinse treatment
Full technical information about the product is in the technical data sheet.
BONDERITE M-NT NC-100 is a no-rinse treatment in sprayand wipe application for aluminium, zinc, zinc alloy and cold rolled steel surfaces.
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Application:
Drying:
Allow the surface to evaporate till it is visually dry.
Caution:
BONDERITE M-NT NC-100 contains complex fluoride compounds.
Storage:
Parameters:
Full technical information about the product is in the technical data sheet.
