The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
+48 607404319 | +48 713735340 |
biuro@woronko-kleje.pl
+48 607 404 319
+48 71 3735340
Start
Contact
Certifications
About Company
Assortment
Brand
You are here:
Products for surface repair and reconstruction, protection coatings
Products for surface repair and reconstruction, protection coatings
Display mode:
list
thumbnails
LOCTITE EA 3463 - 114g (epoxy resin-based filling compound, metal magic steel stick) (IDH.265628)
LOCTITE EA 3471 - 500g (epoxy adhesive with steel filler, putty form) (IDH.229176)
LOCTITE EA 3472 - 500g (liquid epoxy adhesive with steel filler) (IDH.229175)
LOCTITE EA 3473 - 500g (fast curing epoxy adhesive with steel filler) (IDH.229174)
LOCTITE EA 3474 - 500g (mineral filled epoxy adhesive, to reduce sliding wear) (IDH.195891)
LOCTITE EA 3475 - 500g (epoxy adhesive with aluminum filler, up to 120 °C) (IDH.229173)
LOCTITE EA 3478 - 453g (high strength epoxy resin with ferro-silicon filler, up to 120 °C) (IDH.2941219)
LOCTITE EA 3479 - 500g (epoxy adhesive with aluminum filler, up to 190 °C) (IDH.195826)
LOCTITE PC 7117 - 1kg (epoxy resin with ceramic filler, smooth, black) (IDH.2015110)
LOCTITE PC 7117 - 6kg (epoxy resin with ceramic filler, smooth, black) (IDH.2015042)
LOCTITE PC 7218 - 10kg (epoxy resin with coarse ceramic filler, up to 120 °C) (IDH.2228873)
LOCTITE PC 7218 - 1kg (epoxy resin with coarse ceramic filler, up to 120 °C) (IDH.2034255)
LOCTITE PC 7219 - 10kg (epoxy resin with coarse ceramic filler) (IDH.2979657)
LOCTITE PC 7219 - 1kg (epoxy resin with coarse ceramic filler) (IDH.2979654)
LOCTITE PC 7226 - 1kg (epoxy resin with ceramic filler, smooth) (IDH.2974274)
LOCTITE PC 7227 - 1kg (epoxy resin with ceramic filler, smooth, gray) (IDH.2015126)
LOCTITE PC 7255 GN - 1125ml (epoxy resin with ceramic filler, smooth green) (IDH.2389172)
LOCTITE PC 7337 PART A - 0.667 kg (ultra-smooth cermic anti-stick coating with increased abrasion resistance, up to 150 °C) (IDH.2853393)
LOCTITE PC 7337 PART B - 0.333 kg (ultra-smooth ceramic anti-stick coating with increased abrasion resistance, up to 150 °C) (IDH.2853394)
LOCTITE PC 7352 - 400ML (flexible repair paste 2K) (IDH.2550361)
LOCTITE SF 7900 Ceramic Shield - 400ml (ceramic dry film protection coating in spray) (IDH.2137998)
POLYPOXY PS - 20l (corrosion protection and protection coating againts chemicals) (IDH.2243014)
Assortment
Threadlockers
Low-strength anaerobic threadlockers
Low-strength anaerobic threadlockers up to M12
Low-strength anaerobic threadlockers up to M36
Medium-strength anaerobic threadlockers
Medium-strength anaerobic threadlockers up to M12
Medium-strength anaerobic threadlockers up to M36
Medium-strength anaerobic threadlockers up to M50 (stick)
Medium-strength anaerobic threadlockers up to M80
High-strength anaerobic threadlockers
High-stregth anaerobic threadlockers up to M12
High-strength anaerobic threadlockers up to M20
High-strength anaerobic threadlockers up to M36
High-strength anaerobic threadlocker up to M50 (stick)
High strength anaerobic threadlockers up to M80
Thread sealants
Anaerobic sealants for metal threads
Anaerobic thread sealants up to 3/4"
Anaerobic thread sealants up to 2"
Anaerobic thread sealants up to 3"
Sealants for plastic and metal threads
Silicone sealant for plastic threads
Sealing cord for metal and plastic threads
Flange sealants
Anaerobic sealants for rigid flanges
Anaerobic sealants for rigid flanges with gap up to 0,10 mm
Anaerobic sealants for rigid flanges with gap up to 0,25 mm
Anaerobic sealants for rigid flanges with gap up to 0,30 mm
Silicone flange sealants
Sealants for sealing permanent seals
Retaining compounds
Medium-strength anaerobic products for bonding cylindrical fitting parts
Gap up to 0,1mm, temp. up to 150°C
High-strength anaerobic products for bonding cylindrical fitting parts
Gap up to 0,1 mm, temp. up to 150°C
Gap up to 0,15 mm, temp. up to 180°C
Gap up to 0,2 mm, temp. up to 230°C
Gap up to 0,25 mm, temp. up to 180°C
Gap up to 0,5 mm (with activator LOCTITE SF 7649 or 7471), temp. up to 150°C
Adhesives
Hybrid adhesives
Reinforced hybrid adhesives for general purpose
Hybrid adhesives for maintenance and service
Epoxy adhesives
General purpose epoxy adhesives
"Five-minute" epoxy adhesives
Strengthened epoxy adhesives
High temperature epoxy adhesives
Epoxy adhesives with metal filler
Acrylic adhesives
Acrylic adhesives for plastics
Acrylic adhesives for metals
Acrylic adhesives for glass
Acrylic adhesives for magnets
High temperature resistant acrylic adhesives
Acrylic adhesives for polypropylene (PP) and polyethylene (PE)
Acrylic emulsion for plastic bags and pouches
Polyurethane adhesives
One-component polyurethane adhesives
Two-component polyurethane adhesives
Instant adhesives
Instant adhesives for general purposes
Instant adhesives for plastics and rubber
Instant adhesives for metals
Reinforced instant adhesives
Elastic instant adhesives
Instant adhesives for difficult-to-bond plastics (PP, PE, PTFE) and silicone rubber
Instant adhesives with increased temperature resistant
Odourless instant adhesives with low efflorescence
Instant adhesives for large gaps
Instant adhesives with additional UV curing system
Low-strength instant adhesive for locking metal and plastic fasteners
Instant adhesives with very low viscosity
UV adhesives
Solvent-based adhesives
Water-based adhesives
Hot melt adhesives
Adhesives based on silane-modified polymers
MS-Polymer one-component adhesives
MS-Polymer two-component adhesives
Silicone adhesives
One-component silicone adhesives
Two-component silicone adhesives
Sealants
Sealants based on silane-modified polymers
Silicone sealants
Polyurethane sealants
Butyl rubber sealants
Synthetic rubber sealants
Butyl rubber sealing cords and tapes
Synthetic rubber sealing cords and tapes
Primers and activators
Activators
Anaerobic adhesives activators
Instant adhesives activators
Acrylic adhesives activators
Activator for car glass adhesives and ceramic coatings
Primers
Conversion coating
Degreasers and cleaners
Products for surface preparation before bonding and sealing applications
Electrical contact cleaner
Brake cleaner
Cleaner for supply systems
Sealant, adhesive and varnish remover
Product for cleaning hoses in dosing systems
Dashboards and windscreens cleaning products
Hand cleaners
Maintenance cleaners
Pouring and filling compounds
Epoxy resins
Polyurethane masses
Products for surface repair and reconstruction, protection coatings
Repair resins with metal fillers
Repair and protection resins with ceramic fillers
Protective coating based on polysulfide-modified resin
Ceramic protection coating in spray
Elastic repair material based on polyurethane
Oils, lubricants and anti-seize pastes
Anti-Seize pastes
Lubricants
Dry lubricating coatings
Lubricating oils
Penetrating oils
Coolants and cutting oils
Emergency repairs products
Gas and pneumatic system leak detector
Pipe leaks repair
Repair of cavities and defects on conveyor belts, transport belts and rubber parts
Replacing or fixing O-ring seals
Repair Tapes
Filling cavities on surfaces
Corrosion protection
Quick bonding
Other
Chocking system and concrete regeneration
Epoxy chocking system
Magnesium phosphate based fast-curing product for repairing and rebuilding concrete surfaces
Anti-slip coatings
Pipe repair systems
Pipe repair system
Pipe repair kit
Acoustic coatings and soundproofing
Soundproofing mats
Soundproofing foams
Soundproofing masses
Products for bonding, sealing and marking electronic components
Epoxy adhesives
Acrylic adhesives
Silicones
Marking ink
Products for windshield and window bonding and repair
Adhesives for windshield and window pasting
Primers for windshield and window adhesives
Rear window heater repair kit
Rearview mirror adhesive
Chip repair kit
Windscreen removal system
Glass cleaners
Ancillary products
Products for vehicle body repair
Bonding - repair of vehicle bodies
Metal repairs
Seam sealing
Plastic repair
Body fillers
TEROSON PREMIUM LINE polishing systems
Products for vehicle body protection
Anti-splinter coatings
Chassis coatings
Closed profile maintenance
Soundproofing
Dispensers and dosing systems
Dispensers
Manual dispensers
Pneumatic dispensers
Electric dispensers
Mixing nozzles
Dispensing needles
Flexible dispensing tips (PPF)
Conical dosing tips (PPC)
Stainless steel dispensing tips (SSS)
Polypropylene (PP) needles
Semi-automatic dispensing equipment
Controllers
Tanks
Dispense valves
Peristaltic dispensers
Equipment
Accessories
Products with approval
NSF approval (Nonfood Compounds Registration Program)
H1
H2
K1
P1
S6
WRAS approval (potable water)
DVGW approval (gas)
BAM approval (oxygen)
Biocompability approval (medical devices)
Fire resistance approval
Brand
LOCTITE
TEROSON
BONDERITE
Zostałeś zalogowany jako: :
(
)
Edytuj
Kontynuuj zakupy
Historia zamówień
Log out
Log in
Login:
Password:
Nie pamiętasz hasła?
