Try to find the solution
BONDERITE M-CR 1500 AERO - 25kg (płynna powłoka konwersyjna do obróbki metali, minimalizuję korozję i zapewnia lepszą ad
No.
IDH.1937561
BONDERITE M-CR 1500 AERO - 25kg (płynna powłoka konwersyjna do obróbki metali, minimalizuję korozję i zapewnia lepszą ad
Product description:
BONDERITE M-CR 1500 AERO is a liquid chemical used to produce a protective, colourless coating on aluminium. The process is operated at room temperature. The coating produced minimizes corrosion and provides an improved bond for paint. BONDERITE M-CR 1500 AERO and other BONDERITE coating chemicals are listed in the Qualified Product List Mil-DTL-81706 as approved materials for other Methods and Classes of Military Specification Mil-DTL-5541.
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath Make-up:
For each 1,000 L of bath, add to the water with stirring/circulating pump: BONDERITE M-CR 1500 AERO 10.5 kg or 10 L In case of very hard water DI-water should be used for the make-up.
Operating Parameters:
Temperature, °C : 20 to 70 Time, min :1 to 5
Process Steps:
1. Clean/ Pickle
2. Rinse
3. Chromate with BONDERITE M-CR 1500 AERO
4. Rinse
5. Dry
Storage:
Recommended Storage Temperature, °C : 0 to 40 Shelf-life, months (in unopened original packaging) : 24
Parameters:
Cr(VI)-points : 6.7 to 7.7 pH-value : <4.0 Temperature, °C : 20 to 70 Time (immersion), min : 2 Time (spray), sec : 15 to 30 Pressure, bar : 0.5 to 1.0
Full technical information about the product is in the technical data sheet.
BONDERITE M-CR 1500 AERO is a liquid chemical used to produce a protective, colourless coating on aluminium. The process is operated at room temperature. The coating produced minimizes corrosion and provides an improved bond for paint. BONDERITE M-CR 1500 AERO and other BONDERITE coating chemicals are listed in the Qualified Product List Mil-DTL-81706 as approved materials for other Methods and Classes of Military Specification Mil-DTL-5541.
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath Make-up:
For each 1,000 L of bath, add to the water with stirring/circulating pump: BONDERITE M-CR 1500 AERO 10.5 kg or 10 L In case of very hard water DI-water should be used for the make-up.
Operating Parameters:
Process Steps:
1. Clean/ Pickle
2. Rinse
3. Chromate with BONDERITE M-CR 1500 AERO
4. Rinse
5. Dry
Storage:
Parameters:
Full technical information about the product is in the technical data sheet.
