Try to find the solution
BONDERITE C-NE 5013 - 31 kg
No.
IDH.1969964
BONDERITE C-NE 5013 - 31 kg
Product description:
BONDERITE C-NE 5013 is an aqueous neutral cleaner. It is composed of surfactants, salts of organic acids and hydrotropes. BONDERITE C-NE 5013 is free of solvents. organic corrosion protection components, inhibitors, nonionic surfactantsand cationic surfactants. Change of colour is caused by raw material and has no impact on performance.
Application Areas:
Cleaning after cutting, stamping or pressing, simultaneously passivating steel, cast iron and nonferrous metals. BONDERITE C-NE 5013 is used in spray processes.
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath Make-up:
Add the required amount carefully to the circulation system.Concentration on steel and cast iron 5 to 20 g/L Concentration on Aluminium 15 to 30 g/L
Operating Data: Temperature 20 to 80°C Duration of treatment 0.5 to 3 min
Storage:
Recommended Storage Temperature : 0 to 40°C Shelf-life, months : 24 months Frost-Sensitive : yes
Parameters:
Appearance: clear, colourless liquid Density at 20°C, DIN 51757 :~1.07 g/cm³ pH-value (1% solution) : ~8.0
Full technical information can be found in technical data sheet
BONDERITE C-NE 5013 is an aqueous neutral cleaner. It is composed of surfactants, salts of organic acids and hydrotropes. BONDERITE C-NE 5013 is free of solvents. organic corrosion protection components, inhibitors, nonionic surfactantsand cationic surfactants. Change of colour is caused by raw material and has no impact on performance.
Application Areas:
Cleaning after cutting, stamping or pressing, simultaneously passivating steel, cast iron and nonferrous metals. BONDERITE C-NE 5013 is used in spray processes.
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath Make-up:
Add the required amount carefully to the circulation system.
Operating Data:
Storage:
Parameters:
Full technical information can be found in technical data sheet
