The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

Teroson UP 250-759g (Body Filler)

Product description:
TEROSON UP 250 is the elastic filler for all type of paintable plastic repairs. TEROSON UP 250 repairs:
● scratches
● reshaping of bumpers
● imperfections

Directions for use:
Use the amount of Body Filler according to the required repair area and mix the mass in a ratio of a golf ball size (40mL) witha 4 to 5 cm (2 to 3 %) long hardener stripe of TEROSON UP 190, using a spreader until a uniform color has been achieved. After mixing the time to apply the filler is approximately 3 minutes at 20°C. Apply the filler mixture onto the repair area in a way that the dent, scratch or hole is sufficiently filled. Thicker layers should be built up using multiple layers.Surface can be sanded after 25 to 30 minutes at room temperature. Accelerated cure, using an infrared heater (surface temperature max. 60°C) is possible after 10 minutes of the Body Filler application.

Storage:
  • Frost sensitive : no
  • Recommended storage temperature: 10 to 25 °C
  • Shelf life : 24 months in original packaging

    Parameters:
    Component A:
  • Colour: dark grey
  • Odour: styrene
  • Density: approx. 1,86 g/cm³

    Component B:
  • Colour: red
  • Odour : neutral
  • Density : approx. 1,1 g/cm³

    Mixture (Component A+B):
  • Mixing ratio by volume : 100: 2-3
  • Pot life (20 °C, 50% rh) : 3 min.
  • Grinding : possible after 25 to 30 min.

    Full technical information can be found in the technical data sheet
  • Assortment