The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

Teroson RB 4100 BK - 310 ml (sealing mass)

Product description:
TEROSON RB 4100 is a butyl rubber based sealant paste with a low solvent content, which is easily applied from cartridges. When the solvents have evaporated, the remaining material is permanently plastic, resistant to ageing and weathering, with good sealing properties at joints between window frames, rubber window mouldings and motor vehicle glasses. Any excess material can be dabbed off from glass and paintwork easily, as the product’s cohesion (its own inherent strength) is greater than its adhesion (the strength of its bond with the substrate). Further information on the product can be obtained from the local technical department: biuro@woronko-loctite.pl

Steps to achieve the best adhesive results:
TEROSON RB 4100 is applied from nozzle cartridges using standard commercial compressed air or hand guns. The surfaces to be sealed must be dry and free from adhesioninhibiting components or residues of dirt. TEROSON RB 4100 is applied in such a way that all cavities are completely filled, whilst not injecting too much sealant into the joints. After sealing, the rubber moulding must be in full contact with the bodywork and the glass. It is unavoidable that some excess material will be squeezed out of the joints in the process. This bulk of excess material should be removed with a wooden spatula. Some 10 minutes after application, the remaining film is dabbed off with Terostat tape which has been rolled into a ball.

Storage:
  • Frost sensitive : no
  • Recommended storage temperature : 10 to 25 °C
  • Shelf life : 12 months in original packaging

    Parameters:
  • Colour : black
  • Odour : of petroleum
  • Consistency : paste
  • Density : approx. 1.33 g/cm³
  • Solids : approx. 85 %
  • Sag resitance : good
  • In service temperature : -30 to 80 °C

    Full technical information can be found in the technical data sheet
  • Assortment