Try to find the solution
TEROSON VR 500 - 5.5 ml (preparat smarujący, plastilube)
No.
IDH.883259
Price
TEROSON VR 500 - 5.5 ml (preparat smarujący, plastilube)
Product description:
TEROSON VR 500 is an organophyllic, synthetic high quality grease based on super-refined mineral oils and devoid ofmetallic soap or fatty acid. TEROSON VR 500 exhibits the following characteristics:
Free of metallic soaps
Metallic soaps are not resistant against alkalis. Du to its good pH stability TEROSON VR 500 is resistant against soft alkalis and acids. TEROSON VR 500 is not corrosive.
Flow Behaviour
TEROSON VR 500 has a thixotropic flow behaviour. That means, the grease gets “more thin” and flows easier under kinetic energy. This reaction is reversible, so that the gel character is given immediately after ending the movement. The synthetic thickener of TEROSON VR 500 is stable, it cannot be extruded from lubricating interface areas by sudden shock loads and extreme pressures. This extends lubricant service life and reduces maintenance frequency.
Wash out resistant
TEROSON VR 500 is water-insoluble and has an excellent wash out resistance. General-purpose versatility. Due to its characteristics mentioned above TEROSON VR 500 can be used for many purposes. TEROSON VR 500 is digestible with every metal and most of the O-Ring materials. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Before using the preparation, read the precautions and safety advice in the safety data sheet.
2. In the case of products not covered by the obligation of marking for reasons of occupational safety, general precautions associated with the use of chemicals should be observed.
3. Plastilube should be applied on lubricated surfaces in accordance with the instructions of machine manufacturers from the bag or tube.
Storage:
Frost hazard : no Recommended storage temperature : 10 to 20 ° C Storage time : 24 months
Parameters:
Full technical information can be found in the technical data sheet.
TEROSON VR 500 is an organophyllic, synthetic high quality grease based on super-refined mineral oils and devoid ofmetallic soap or fatty acid. TEROSON VR 500 exhibits the following characteristics:
Free of metallic soaps
Metallic soaps are not resistant against alkalis. Du to its good pH stability TEROSON VR 500 is resistant against soft alkalis and acids. TEROSON VR 500 is not corrosive.
Flow Behaviour
TEROSON VR 500 has a thixotropic flow behaviour. That means, the grease gets “more thin” and flows easier under kinetic energy. This reaction is reversible, so that the gel character is given immediately after ending the movement. The synthetic thickener of TEROSON VR 500 is stable, it cannot be extruded from lubricating interface areas by sudden shock loads and extreme pressures. This extends lubricant service life and reduces maintenance frequency.
Wash out resistant
TEROSON VR 500 is water-insoluble and has an excellent wash out resistance. General-purpose versatility. Due to its characteristics mentioned above TEROSON VR 500 can be used for many purposes. TEROSON VR 500 is digestible with every metal and most of the O-Ring materials. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Before using the preparation, read the precautions and safety advice in the safety data sheet.
2. In the case of products not covered by the obligation of marking for reasons of occupational safety, general precautions associated with the use of chemicals should be observed.
3. Plastilube should be applied on lubricated surfaces in accordance with the instructions of machine manufacturers from the bag or tube.
Storage:
Parameters:
- Colour : brownish
- Odour: mild
- Consistency : paste
- Density approx. : 0.9 g/cm³
- Solids approx. : 9 %
- Solids Aerosol ca. : 6 %
- Penetration : 265 to 295
- Drop Point : none
- In service temperature : -45 °C to 180 °C
Full technical information can be found in the technical data sheet.
