The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

Loctite SI 5130 WH CR-310 ml (white silicone)/Loctite 595

przykład użycia
Product description:
LOCTITE SI 5130 is designed for superior bonding and sealing properties to most surfaces (not recommended for concrete). This product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. It is formulated to withstand extreme temperature cycling, UV light and ozone. The thixotropic nature of LOCTITE SI 5130 reduces the migration of liquid product after application to the substrate. Further information on the product can be obtained from the local technical department: biuro@woronko-loctite.pl

Steps to achieve the best adhesive results:
1. For best performance bond surfaces should be clean and free from grease. Use LOCTITE SF 7063.
2. Full performance properties will develop over 72 hours.
3. Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after the product is dispensed.
4. Excess material can be easily wiped away with non-polar solvents.

Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.

Parameters:
  • Specific gravity 25 °C : 1,01

    Cured for 1 week at the temperature 22 °C
  • Hardness, ISO 868, Shore A : ≥14
  • Elongation, ISO 37, % : ≥275
  • Tensile strength, ISO 37 : ≥0,8
  • No-cured appearance : white paste

    Full technical information can be found in the technical data sheet.
  • Assortment