The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

Loctite SF 7803 - 400 ml (anti-corrosive coating for metals)

Product description:
LOCTITE SF 7803 provides a non-drying, tack-free coating on metals with long term corrosion protection and has good U.V. resistance. This product is especially suited for iron, steel, sheet steel, pipes, moulds, machines and installations that have to be stored outdoors. This product is typically used in applications with an operating range of -30 °C to +60 °C. Further information on the product can be obtained from the local technical department: biuro@woronko-loctite.pl

Directions for use:
1. Shake can thoroughly before use.
2. For best results, apply to clean, dry surfaces. For cleaning you can use LOCTITE SF 7063.

Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.

Parameters:
  • Chemical Type Mineral oil, parrafin wax and corrosion inhibitors
  • Appearance : white
  • Odor : solvent
  • Density at 20 °C, g/ml : 0.865
  • Viscosity at 20°C, mPa·s (cP) : 1,000
  • Peak Temperature, °C : 70

    Full technical information can be found in the technical data sheet
  • Assortment