The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

LOCTITE LB 8009 - 453g (anti-seize lubricant without metallic, up to 1315 °C)

LOCTITE LB 8009 - 453g (anti-seize lubricant without metallic, up to 1315 °C) (IDH.504219)

Product description:
LOCTITE 8009 is a graphite/calcium fluoride formulation, which is free from lead, copper, sulfur, and their compounds. LOCTITE 8009 contains no free metals and is compatible with stainless steel and other nickel alloys. Typical applications of this product includes bolts, screws, studs, pipe joints, nuts, plugs, bushings, extruding and forming dies, heat exchangers, shear blades, metal bending, mechanical packings, etc. It is used in chemical plants, oil refineries, power plants, paper mills, steel mills and foundries, synthetic fiber plants, ship and aerospace manufacturing and service, etc. This product is typically used in applications with an operating range of -29 °C to +1315 °C. Further information about the product: biuro@woronko-kleje.pl

Directions for use:
1. For best performance the mating surface should be clean and free of grease. Use LOCTITE SF 7063.
2. Note: When grinding or wire brushing, use a dust mask. Dust from cleaning threads may contain metal compounds. Inhalation may cause lung injury or other harm.
3. Apply thin coating to mating surfaces, assemble.
4. Do not use thinner.

Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.

Parameters:
  • Specific Gravity ( 25 °C ) : 1,15 to 1,27
  • Penetration, ISO 2137, 1/10mm : 270 to 370
  • Appearance : grey paste
  • Torque coefficient, k:
    -12.7 mm steel bolts (grade 8) and nuts (grade 5) : 0,16
    -12.7 mm steel bolts (grade 8) and nuts (grade 5), solvent cleaned, not lubricated : 0,27
  • Working temperature : -29 °C to +1315 °C


Full technical information can be found in the technical data sheet.

Assortment