The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

LOCTITE LB 8008 - 453g (copper-based anti-seize C5-A lubricant, up to 980 °C)

LOCTITE LB 8008 - 453g (copper-based anti-seize C5-A lubricant, up to 980 °C) (IDH.503147)

Product description:
LOCTITE LB 8008 provides a shield against high temperature seizing and galling. All mated parts, studs, bolts, flanges and gaskets, remove more easily and in cleaner and better condition. This product can be used on copper, brass, cast iron, steel, all alloys including stainless steel, all plastics and all non-metallic gasketing materials. Typical applications include original equipment and maintenance, and equipment associated with petroleum chemicals, steel mills, power plants, marine and foundries. This product is typically used in applications with an operating range of -29 °C to +982 °C. Further information about the product: biuro@woronko-kleje.pl

Directions for use:
1. For best performance the mating surface should be clean and free of grease. Use LOCTITE SF 7063.
2. Note: When grinding or wire brushing, use a dust mask. Dust from cleaning threads may contain metalcompounds. Inhalation may cause lung injury or other harm.
3. Apply thin coating to threads and flats of nuts and bolts, assemble.

Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.

Parameters:
  • Appearance : copper paste
  • Solid content : 40% cooper and graphite
  • Specific gravity : 1,2
  • Working temperature : -29 °C do +982 °C
  • K factor (steel bolts and nuts) : 0,16
  • K factor (solvent-free, not lubricated) : 0,27


Full technical information can be found in the technical data sheet.

Assortment