The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

Loctite 8201-400ml (multi-functional penetrating and lubricating oil, to 120 °C)

przykład użycia
Product description:
LOCTITE 8201 is a universal penetrating liquid which frees, lubricates, cleans, dries and prevents corrosion on allmachinery. This product does not contain silicone. It is used to free seized or corroded parts such as threaded fasteners,hinges and cylindrical joints. LOCTITE 8201 provides light lubrication of small mechanisms. It displaces moisture from damp electrical devices and leave a protective anti-corrosive film. This product is typically used in applications with an operating range of -20 °C to +120 °C. Further information on the product can be obtained from your local technical department: biuro@woronko-loctite.pl

Directions for use:
1. Shake can thoroughly. Spray from a distance of about 15 to 20 cm onto the area to be treated.
2. Apply to clean parts which need lubricating, avoid excessive lubrication. For cleaning you can use LOCTITE SF 7063.
3. Do not apply product to equipment while food is being processed or transported.

Storage:
The product is classified as HIGHLY FLAMMABLE and must be stored in an appropriate manner in compliance with relevant regulations. Do not store near oxidizing agents or combustible materials. Store product in the unopened container in a dry location. Storage information may also be indicated on the product container labelling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Henkel cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.

Parameters:
  • Chemical composition: vegetable and mineral oils
  • Color: yellow, transparent
  • Odor: weak
  • Density at 25°C, g/ml: 0,8
  • Viscosity at 20°C, mm²/s : 11
  • Working temperature, °C: -30 do +50


Full technical information can be found in the technical data sheet.

Assortment