The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

LOCTITE LB 8023 - 453g (anti-seize lubricant, resistant to water washout)

LOCTITE LB 8023 - 453g (anti-seize lubricant, resistant to water washout) (IDH.504618)

Product description:
LOCTITE 8023 features a formulation that protects assemblies exposed to direct or indirect fresh or salt water and high humidity conditions. Typical marine applications include bolts, screws, studs, pipe joints, nuts, shafts, bushings, splines, chains, and cables. Other applications include pulp and paper mills, water and waste water treatment plants, and dressing for water pump gaskets and flanges. This product is typically used in applications with an operating range of -29 °C to +1315 °C. Further information about the product: biuro@woronko-kleje.pl

Directions for use:
1. For best performance the mating surface should be clean and free of grease. You can use LOCTITE SF 7063
2. Clean parts with a wire brush prior to application of product.
3. Apply thin coating to mating surfaces, assemble.
4. Do not use thinner.
5. Keep container tightly closed when not in use.

Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.

Parameters:
  • Working temperature : from -29 °C to 1315 °C
  • Excellent resistance to rinsing with water
  • Excellent resistance to water mist
  • Excellent lubricating properties
  • Protects against galvanic corrosion

Full technical information can be found in the technical data sheet.

Assortment