The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

Loctite 8014-907g (anti-seize lubricant without metallic, for contact with food)

Product description:
LOCTITE LB 8014 prevents seizing, galling, friction, and wear on threaded joints and other metal-to-metal surfaces. It is a combination of white lubricating solids and extreme pressure lubricating agents in an aluminum gelled white oil. Typical applications include pipe joints, nuts, bolts and studs, flange gaskets, slip-fit, press-fit and keyed shafts, and metal-to-metal contact involving stainless steel and other stainless alloys. It is used in industrial food industries such as meat and poultry packing plants, dairy products processing plants, canningplants, grain processing plants, sugar processing plants, bakeries, beverage plants, breweries, hospitals, and other general plant maintenance. This product is typically used in applications with an operating range of -29 °C to +400 °C. Further information on the product can be obtained from your local technical department: biuro@woronko-loctite.pl

Directions for use:
1. For best performance the mating surface should be clean and free of grease. Use LOCTITE SF 7063.
2. Apply thin coating to threads and flats of nuts and bolts, assemble.
3. Use full strength. Do not thin.

Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.

Parameters:
  • Color: white
  • Working temperature: -30 °C to +400 °C
  • Penetration, mm (ASTM D217-68 without crimping) : 340


Full technical information can be found in the technical data sheet.

Assortment