Try to find the solution
LOCTITE 438 - 20g (instant adhesive)
No.
IDH.1924114
Price
LOCTITE 438 - 20g (instant adhesive)
Product description:
LOCTITE 438 is a rubber toughened adhesive with increased flexibility and peel strength along with enhancedresistance to shock. The product provides rapid bonding on a wide range of materials, including metals, plastics andelastomers, as well as porous and absorbent materials like wood, paper, leather and fabric. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
1. For best performance bond surfaces should be clean and free from grease. Use LOCTITE SF 7063.
2. This product performs best in thin bond gaps (0,05 mm).
3. Excess adhesive can be dissolved with Loctite cleanup solvents, nitromethane or acetone.
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling
Optimal Storage: 2 °C to 8 °C. Storage below 2 °C or greater than 8 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Shear strength ( cured for 24 hours at 22 °C) , ISO 4587 :
Tensile strength, ISO 6922 :
Peel strength, ISO 8510-2 :
Full technical information can be found in the technical data sheet.
LOCTITE 438 is a rubber toughened adhesive with increased flexibility and peel strength along with enhancedresistance to shock. The product provides rapid bonding on a wide range of materials, including metals, plastics andelastomers, as well as porous and absorbent materials like wood, paper, leather and fabric. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
1. For best performance bond surfaces should be clean and free from grease. Use LOCTITE SF 7063.
2. This product performs best in thin bond gaps (0,05 mm).
3. Excess adhesive can be dissolved with Loctite cleanup solvents, nitromethane or acetone.
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling
Optimal Storage: 2 °C to 8 °C. Storage below 2 °C or greater than 8 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Shear strength ( cured for 24 hours at 22 °C) , ISO 4587 :
- Shot-blasted steel: 19 N/mm²
- Aluminum (etched) : 18 N/mm²
- Nitrile rubber : 0,3 N/mm²
- ABS : 10 N/mm²
- PVC : 12 N/mm²
- Polycarbonate : 6 N/mm²
- Phenolic : 11 N/mm²
- Epoxy G 10: 20 N/mm²
Tensile strength, ISO 6922 :
- Shot-blasted steel : 34 N/mm²
- Buna-N gum : 4 N/mm²
Peel strength, ISO 8510-2 :
- Shot-blasted steel : 4 N/mm
Full technical information can be found in the technical data sheet.
