The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings. OK

Try to find the solution:

[zamknij]     

Loctite 438 - 20 g (instant adhesive)

Product description:
LOCTITE 438 is a rubber toughened adhesive with increased flexibility and peel strength along with enhancedresistance to shock. The product provides rapid bonding on a wide range of materials, including metals, plastics andelastomers, as well as porous and absorbent materials like wood, paper, leather and fabric. Further information on the product can be obtained from your local technical department: biuro@woronko-loctite.pl

Steps to achieve the best adhesive results:
1. For best performance bond surfaces should be clean and free from grease. Use LOCTITE 7063.
2. This product performs best in thin bond gaps (0,05 mm).
3. Excess adhesive can be dissolved with Loctite cleanup solvents, nitromethane or acetone.

Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling
Optimal Storage: 2 °C to 8 °C. Storage below 2 °C or greater than 8 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.

Parameters:
Shear strength ( cured for 24 hours at 22 °C) , ISO 4587 :
  • Shot-blasted steel: 19 N/mm²
  • Aluminum (etched) : 18 N/mm²
  • Nitrile rubber : 0,3 N/mm²
  • ABS : 10 N/mm²
  • PVC : 12 N/mm²
  • Polycarbonate : 6 N/mm²
  • Phenolic : 11 N/mm²
  • Epoxy G 10: 20 N/mm²

Tensile strength, ISO 6922 :
  • Shot-blasted steel : 34 N/mm²
  • Buna-N gum : 4 N/mm²

Peel strength, ISO 8510-2 :
  • Shot-blasted steel : 4 N/mm

Full technical information can be found in the technical data sheet.

Assortment

bez grupy K1
bez grupy H1
bez grupy H2
bez grupy P1

Since 1992

PREMIUM PARTNER

Premium partner