LOCTITE AA 3504 - 250 ml (structural anaerobic adhesive with secondary UV curing)
No.
IDH.195539
LOCTITE AA 3504 - 250 ml (structural anaerobic adhesive with secondary UV curing)
LOCTITE® AA 3504
Product Description
LOCTITE® AA 3504 is an amber, urethane methacrylate-based structural adhesive. It’s typically used for bonding ferrites to plated materials in electric motors, loudspeaker hardware, and jewellery, where fast-fixturing is required and adhesive outside the bond line must be completely cured. It offers good resistance to impact and humidity and tolerates operating temperatures up to 120°C (248°F). LOCTITE AA 3504 is a 1-part adhesive but requires activator LOCTITE® SF 7649 before use. It can be cured when exposed to UV radiation of 365 nm. To obtain full cure on surfaces exposed to air, radiation at 250 nm is also required.
Properties
- LOCTITE SF 7649 activator required for use,
- Temperature-resistant up to 120°C (248°F),
- Resistant to impact and humidity,
- Dual cure: activator or UV light.
Key Technical Features
| Technology | Acrylic |
| Chemical type | Urethane methacrylate |
| Appearance (uncured) | Amber liquid |
| Cure | Anaerobic |
| Viscosity | Medium |
| Components | One component - requires no mixing |
| Secondary Cure | UV |
| Application | Bonding |
| Cure Benefit | Room temperature cure |
* Full technical information is available in the product technical data sheet.
Upon request, we provide certificates such as: COA (Certificate of Analysis), COC (Certificate of Conformity), and COO (Certificate of Origin).
