Try to find the solution
BONDERITE S-MA 98 JC23 WENS+ - 23kg (bezbarwna, powłoka chroniąca przed odpryskami spawalniczymi na nielakierowanych powierzchniach / clear, ready-to-use coating to protect against welding spatter on unpainted surfaces) : (kanister / canister)
No.
IDH.2582344
BONDERITE S-MA 98 JC23 WENS+ - 23kg (bezbarwna, powłoka chroniąca przed odpryskami spawalniczymi na nielakierowanych powierzchniach / clear, ready-to-use coating to protect against welding spatter on unpainted surfaces) : (kanister / canister)
Product description:
BONDERITE S-MA 98 is a water based, body-in-white anti-weld splatter agent material. This product is applied prior to a welding operation and reduces the deposit of weld splatter on the unpainted automobile. BONDERITE S-MA 98 is easily removed in the alkaline cleaner stage of the conversion coating line, or, if desired, can be removed with water washing. Further informations about the product can be obtain from local technical department: biuro@woronko-kleje.pl
Directions for use:
Preliminary statement
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Equipment
BONDERITE S-MA 98 is applied by hand, spray, halo ring or by suitable car wash equipment. It is used as received, no dilution is needed.
Application
BONDERITE S-MA 98 is typically applied by hand-held or stationary spray equipment such as a conventional cup, pressure pot or airless spray unit, a hand pump pressurized spray container or other similar equipment.
Removal
BONDERITE S-MA 98 is easily removed in the alkaline process cleaner of the phosphate system or it can be rinsed off with water.
Storage:
Recommended Storage Temperature, °C : 5 to 40 Shelf-life, months (in unopened original packaging) : 24
Parameters: Technology : surface treatment Product Type : Water Based Anti-Weld Splatter Agent Application : Automotive Industry Appearance : Homogeneous colorless liquid Density at 20°C : 1.03 pH (undiluted) : 9.5
Further information can be obtain from technical data sheet
BONDERITE S-MA 98 is a water based, body-in-white anti-weld splatter agent material. This product is applied prior to a welding operation and reduces the deposit of weld splatter on the unpainted automobile. BONDERITE S-MA 98 is easily removed in the alkaline cleaner stage of the conversion coating line, or, if desired, can be removed with water washing. Further informations about the product can be obtain from local technical department: biuro@woronko-kleje.pl
Directions for use:
Preliminary statement
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Equipment
BONDERITE S-MA 98 is applied by hand, spray, halo ring or by suitable car wash equipment. It is used as received, no dilution is needed.
Application
BONDERITE S-MA 98 is typically applied by hand-held or stationary spray equipment such as a conventional cup, pressure pot or airless spray unit, a hand pump pressurized spray container or other similar equipment.
Removal
BONDERITE S-MA 98 is easily removed in the alkaline process cleaner of the phosphate system or it can be rinsed off with water.
Storage:
Parameters:
Further information can be obtain from technical data sheet