BONDERITE C-MC 352 - 23kg (maintenance cleaner specially formulated for degreasing all types of metals by spraying)
No.
IDH.2551003
BONDERITE C-MC 352 - 23kg (maintenance cleaner specially formulated for degreasing all types of metals by spraying)
Opis produktu:
BONDERITE C-MC 352 is a specially formulated product for the degreasing of all types of metals by spraying.
Application Areas:
BONDERITE C-MC 352 has a strong detergent efficiency. BONDERITE C-MC 352 is used during manufacturing processes as well as for renovation. BONDERITE C-MC 352 is a liquid that permits automatical addings. Further information about the product: biuro@woronko-kleje.pl
Composition:
● sodium silicates
● surfactants
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath Control:
Titrate 50 mL aliquot working solution with 0.5 N acid to methylorange end point. Concentration (g/L)= 4.1 x titration (mL 0.5 N acid).
Storage:
Recommended Storage Temperature : 5 to 50°C Shelf-life, months : 24
Parameters:
Appearance: yellow liquid Density at 20°C : 1.21 pH (10 g/L in water : ~11.5 Foam behavior: non foaming at : T > 50°C
Full technical information can be found in Technical Data Sheet
BONDERITE C-MC 352 is a specially formulated product for the degreasing of all types of metals by spraying.
Application Areas:
BONDERITE C-MC 352 has a strong detergent efficiency. BONDERITE C-MC 352 is used during manufacturing processes as well as for renovation. BONDERITE C-MC 352 is a liquid that permits automatical addings. Further information about the product: biuro@woronko-kleje.pl
Composition:
● sodium silicates
● surfactants
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath Control:
Titrate 50 mL aliquot working solution with 0.5 N acid to methylorange end point. Concentration (g/L)= 4.1 x titration (mL 0.5 N acid).
Storage:
Parameters:
Full technical information can be found in Technical Data Sheet
