TEROSON SB 2140 - 23kg (solvent based contact adhesive, up to 120 °C)
No.
IDH.68517
Product description:
TEROSON SB 2140 is a solvent containing contact adhesive based on polychloroprene. TEROSON SB 2140 has excellent initial adhesion and the ability to bond varying substrates to one another. TEROSON SB 2140 is particularly used when the bondings have to withstand temperatures (up to 120°C). TEROSON SB 2140 is adjusted for spray application.
Application Areas
TEROSON SB 2140 can be used as a general purpose adhesive to bond various materials like wood, variable plastics, metals, felts, and many more, to themselves and to one another. TEROSON SB 2140 can not be used for bonding of polystyrene foam, PE, PP, PTFE and soft PVC. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
Pre-Treatment
The bonding surfaces must be dry and free of oil, grease, dust and anti-adhesive constituents. Rubber parts must be free of talcum and other gliding agents.
Application
Stir TEROSON SB 2140 before use. The adhesive is then applied uniformly to both bonding surfaces with a brush or spatula (smooth or fine notched). Depending on application method, layer thickness, temperature, room ventilation and humidity the parts coated with adhesive must be allowed an open time of approx. 15 to 20 minutes. (The so-called "finger test" has proven itself a more reliable judgement of the open time than the time data. The adhesive must be dry but slightly tacky). Taking exact care of the open time is important, for the bonding results can be influenced by a too short as well as too long waiting period. Match the Parts exactly and press them quickly but firmly.
Cleaning
Adhesive residues/stains can be removed before curing - including application equipment and containers - with Teroson VR 40 or Teroson VR 50 (precheck compatibility with the substrates).
Storage:
Recommended storage temperature, °C 10 to 20 Shelf-life (in unopened original packaging), months : 12
Parameters: Color: beige Odour: depending on the solvent Density: 0,83 g/cm3 Consumption: when applying adhesive on both sides, depending on the properties of the primer and application method: approx: 150‑250 g/m3 Evaporation time of the solvent: 15‑20 minutes Gluing temperature: 18–25°C Application temperature: -30° to 120°C (short-lived (up to 1 h): 130 °C)
Full technical information can be found in the technical data sheet.
TEROSON SB 2140 is a solvent containing contact adhesive based on polychloroprene. TEROSON SB 2140 has excellent initial adhesion and the ability to bond varying substrates to one another. TEROSON SB 2140 is particularly used when the bondings have to withstand temperatures (up to 120°C). TEROSON SB 2140 is adjusted for spray application.
Application Areas
TEROSON SB 2140 can be used as a general purpose adhesive to bond various materials like wood, variable plastics, metals, felts, and many more, to themselves and to one another. TEROSON SB 2140 can not be used for bonding of polystyrene foam, PE, PP, PTFE and soft PVC. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
Pre-Treatment
The bonding surfaces must be dry and free of oil, grease, dust and anti-adhesive constituents. Rubber parts must be free of talcum and other gliding agents.
Application
Stir TEROSON SB 2140 before use. The adhesive is then applied uniformly to both bonding surfaces with a brush or spatula (smooth or fine notched). Depending on application method, layer thickness, temperature, room ventilation and humidity the parts coated with adhesive must be allowed an open time of approx. 15 to 20 minutes. (The so-called "finger test" has proven itself a more reliable judgement of the open time than the time data. The adhesive must be dry but slightly tacky). Taking exact care of the open time is important, for the bonding results can be influenced by a too short as well as too long waiting period. Match the Parts exactly and press them quickly but firmly.
Cleaning
Adhesive residues/stains can be removed before curing - including application equipment and containers - with Teroson VR 40 or Teroson VR 50 (precheck compatibility with the substrates).
Storage:
Parameters:
Full technical information can be found in the technical data sheet.