TEROSON PU 9225 UF ME - 50ml (polyurethane adhesive)
No.
IDH.1786434
Associated products:
- TEROSON PU 9225 - 50ml (klej poliuretanowy) (IDH.267081)
- LOCTITE 97956 (adapter for double (1:1) 50ml cartridges, compatible with standard 300ml cartridge squeezers) (IDH.476895A)
- LOCTITE 96001 (manual applicator for 50ml cartridges, mixing ratio of components A&B 1:1 or 1:2) (IDH.267452)
- TEROSON ET QUAD ST MIX SMALL (for 50 ml cartridges 1:1, 1:2) (IDH.2900614)
- TEROSON VR 10 - 1l (surface pretreatment product) (IDH.2558379)
- TEROSON PU 9225 SF - 50ml (polyurethane adhesive) (IDH.882088)
- TEROSON VR 155 - 150ml (xylene-free plastic primer) (IDH.2919502)
TEROSON PU 9225 UF ME - 50ml (polyurethane adhesive)
Associated products:
- TEROSON PU 9225 - 50ml (klej poliuretanowy) (IDH.267081)
- LOCTITE 97956 (adapter for double (1:1) 50ml cartridges, compatible with standard 300ml cartridge squeezers) (IDH.476895A)
- LOCTITE 96001 (manual applicator for 50ml cartridges, mixing ratio of components A&B 1:1 or 1:2) (IDH.267452)
- TEROSON ET QUAD ST MIX SMALL (for 50 ml cartridges 1:1, 1:2) (IDH.2900614)
- TEROSON VR 10 - 1l (surface pretreatment product) (IDH.2558379)
- TEROSON PU 9225 SF - 50ml (polyurethane adhesive) (IDH.882088)
- TEROSON VR 155 - 150ml (xylene-free plastic primer) (IDH.2919502)
TEROSON® PU 9225 UF ME
Product Description
TEROSON® PU 9225 UF ME is an ultra-fast two-component polyurethane-based adhesive designed for the repair of plastic parts on vehicles. When applying the product to plastics, an approved primer is necessary, for example TEROSON® VR 155. TEROSON® PU 9225 UF ME is used for the repair of bumpers, trim, and body parts made of plastics such as PP/EPDM, SMC, PC, PA, ABS, and PUR.
Properties
- Ultra-fast,
- For bonding plastic parts on vehicles,
- Sandable,
- Overpaintable with all car paint systems,
- OEM approved.
Key Technical Features
| Technology | Polyurethane, Micro Emission |
| Product Type | For the repair of plastic parts |
| Additional Information | 2-Component |
| Colour (Component A) | Grey |
| Density (Component A) | ~1.6 g/cm³ |
| Colour (Component B) | White |
| Density (Component B) | ~1.3 g/cm³ |
| Colour (Component A + B) | Grey |
| Mixing ratio A : B by volume | 1 : 1 |
| Potlife (25 g, 23°C ) | <1 min(s) |
| Tack-free time (23 °C, 50 % rh) | approx. 2 min(s) |
| Curing time at 23 °C | approx. 1.5 hr(s) |
* Full technical information is available in the product technical data sheet.
Upon request, we provide certificates such as: COA (Certificate of Analysis), COC (Certificate of Conformity), and COO (Certificate of Origin).
