The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

TEROSON MS 9320 SF GY - 300ml (super fast, gray, sprayable, extrusable and brushable mass for sealing joints and seams in cars)

No.

IDH.2486736


Associated products:
  1. TEROSON ET MULTIPRESS (air gun for applying seams and spraying low and medium viscosity sealing products) (IDH.142241)
  2. TEROSON MS 9320 SF OC - 300ml (super fast, ochre-colored, sprayable, extrusable and brushable mass for sealing joints and seams in cars) (IDH.2558390)
  3. TEROSON ET DOOR EDGE NOZZLE (wing nozzle) (IDH.782222)
  4. TEROSON ET Flatstr Nozzle (flat jet nozzle) (IDH.1305486A)
  5. TEROSON ET POWERLINE II (high pressure pneumatic gun for dispensing continuous beads from low to high viscosity products) (IDH.960304)
  6. TEROSON STAKU (manual dispenser for 300ml cartridges) (IDH.142240)
  7. TEROSON ET Flex sealant nozzle (M15 nozzle for Terostat II) (IDH.368243)
  8. TEROSON ET Widestr Nozzle (wide jet nozzle) (IDH.1470999A)
Files to download:
  1. Karta Techniczna - TEROSON MS 9320 SF GY
  2. Technical Data Sheet - TEROSON MS 9320 SF GY
  3. Technisches Datenblatt - TEROSON MS 9320 SF GY

TEROSON MS 9320 SF GY - 300ml (super fast, gray, sprayable, extrusable and brushable mass for sealing joints and seams in cars)

TEROSON MS 9320 SF GY - 300ml (super fast, gray, sprayable, extrusable and brushable mass for sealing joints and seams in cars) (IDH.2486736)


Associated products:
  1. TEROSON ET MULTIPRESS (air gun for applying seams and spraying low and medium viscosity sealing products) (IDH.142241)
  2. TEROSON MS 9320 SF OC - 300ml (super fast, ochre-colored, sprayable, extrusable and brushable mass for sealing joints and seams in cars) (IDH.2558390)
  3. TEROSON ET DOOR EDGE NOZZLE (wing nozzle) (IDH.782222)
  4. TEROSON ET Flatstr Nozzle (flat jet nozzle) (IDH.1305486A)
  5. TEROSON ET POWERLINE II (high pressure pneumatic gun for dispensing continuous beads from low to high viscosity products) (IDH.960304)
  6. TEROSON STAKU (manual dispenser for 300ml cartridges) (IDH.142240)
  7. TEROSON ET Flex sealant nozzle (M15 nozzle for Terostat II) (IDH.368243)
  8. TEROSON ET Widestr Nozzle (wide jet nozzle) (IDH.1470999A)

TEROSON® 9320 SF GY

Product Description

TEROSON® 9320 SF GY is a super fast, sprayable, extrusable and brushable sealant based on SMP-Polymer, that crosslinks to a rubber-elastic material with good abrasion resistance by absorbing humidity from the air. Skin formation time and curing time depend on humidity and temperature. In addition, the curing time also depends on the layer thickness. By increasing the temperature and humidity, the reaction time can be reduced; low temperatures as well as low humidity retard the process.


Properties

  • Sealant and seam sealing product in one,
  • Super fast,
  • High sag resistance,
  • Sprayable, extrusable and brushable,
  • Can be applied using a flat or broad jet spray nozzle,
  • Can be painted up to three days after application,
  • Broad range of adhesion without primer,
  • Spotweldable if not completely cured,
  • Free of isocyanate and silicone,
  • Very rapid curing,
  • UV resistant,
  • High ageing resistance.

Key Technical Features

Technology SMP technology
Product Type Multi-functional sealant 6in1
Components One-component
Cure Humidity
Appearance Grey
Consistency Pasty

* Full technical information is available in the product technical data sheet.
Upon request, we provide certificates such as: COA (Certificate of Analysis), COC (Certificate of Conformity), and COO (Certificate of Origin).

Assortment