TEROSON EP 5010 TR - 200ml (epoxy resin for auto body panel beating repairs and restoration of metal car body surfaces)
No.
IDH.2989853
Associated products:
TEROSON EP 5010 TR - 200ml (epoxy resin for auto body panel beating repairs and restoration of metal car body surfaces)
Associated products:
TEROSON® EP 5010 TR
Product Description
TEROSON® EP 5010 TR is a solvent free, two component, high strength levelling compound based on Epoxy Resins with low density. By heating up both components the chemical reaction will accelerate. TEROSON® EP 5010 TR has been specially developed for body rework and for rebuilding of car body metal surfaces to substitute traditional tin soldering. It is free of isocyanate, silicones and lead. The product has no shrinkage and is excellent for grinding. TEROSON® EP 5010 TR shows no sagging and has very good reshaping properties.
Properties
- Solvent-, silicone-, and lead-free alternative to tin soldering,
- Perfect for auto body panel beating repairs and restoration of metal car body surfaces,
- Excellent grinding and re-building properties,
- Excellent sag resistance and adhesion to metals,
- No damage to existing painted areas and corrosion protection,
- No shrinkage.
Key Technical Features
| Chemical type | Epoxy Resin |
| Appearance (resin) | Dark grey |
| Appearance (hardener) | White/ light grey |
| Appearance (mixed) | Grey |
| Components | Two components – requires mixing |
| Mix ratio, (by volume) Resin : Hardener | 2 : 1 |
| Density (cured) | approx. 0.7 g/cm³ |
| In service temperature | -40 to 90 °C |
| Product type | Body Rework, Rebuilding of Car, Metal Surfaces |
* Full technical information is available in the product technical data sheet.
Upon request, we provide certificates such as: COA (Certificate of Analysis), COC (Certificate of Conformity), and COO (Certificate of Origin).
