The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

LOCTITE LB 8013 - 453g (anti-seize lubricant without metallic, up to 1315 ° C)

No.

IDH.504588

LOCTITE LB 8013 - 453g (anti-seize lubricant without metallic, up to 1315 ° C)

LOCTITE LB 8013 - 453g (anti-seize lubricant without metallic, up to 1315 ° C) (IDH.504588)

Product description:
LOCTITE LB 8013 is a specially formulated metal-free anti-seize lubricant, produced under 100% controlled conditions for the highest purity. It is formulated with high purity raw materials and contains only trace levels of halogens, sulfur, copper, aluminum and heavy metals. Developed to protect steel, stainless steel and other proprietary alloys. During assembly, it prevents high friction, galling and seizing and promotes uniform and predictable clamping. During operation, the high purity prevents stress corrosion. During disassembly, it prevents seizing, galling and destruction of threads. It provides significant improvement in anti-seize performance and gives it more uniform torque tension. Typical applications includes bolts, valves, studs, pipe fittings, slip fits and press fits in nuclear electric power generating plants, chemical plants, pharmaceutical plants, paper mills and other locations where stainless steel fasteners are used. This product is typically used in applications with an operating range of -29 °C to +1315 °C. Further information about the product: biuro@woronko-kleje.pl

Directions for use:
1. Before or during assembly, wipe or brush onto threads and other joint surfaces needing protection.
2. Use full strength. Do not thin.

Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.

Parameters:
  • Excellent counteraction of baking: tests show a reduction in the replacement of 90-sided studs.
  • Unified tension with tightening torque: smaller difference in the coefficients of friction between bolt-connected materials.
  • High purity: made of the highest purity ingredients
  • Does not contain copper: less than 50 ppm copper
  • Essentially used on a dry surface at a temperature of -29 °C to 1315 °C
  • Specific gravity : 1,12 - 1,24
  • Penetration, ASTM D 217-88 without crimping, mm: 325 - 375


Full technical information can be found in the product technical sheet.

Assortment