TEROSON VR 10 - 1l (cleaner) / Reiniger FL
No.
IDH.2558379
Associated products:
TEROSON VR 10 - 1l (cleaner) / Reiniger FL
Associated products:
Product description:
TEROSON VR 10 is a liquid universal pretreatment product. Base of the product is white spirit (aromatic free and low n-hexane content). It contains no chlorinated hydrocarbons; it is not harmful to car paints when used on a short-term basis. TEROSON VR 10 will not inhibit the curing of adhesive/sealants. TEROSON VR 10 is mainly used for pretreatment of substrates prior to application of adhesives and sealants. Accurate pretreatment of surfaces is essential for a perfect adhesion. Depending on the basis of the adhesives and sealants TEROSON VR 10 can also be used for removing of tools and contaminated surfaces. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
Depending on the degree of contamination, size and shape of the parts to be treated, TEROSON VR 10 is applied and wiped off with a non-woven tissue or the like. To prevent contamination of the contents in the original packaging, the product should either be poured onto the tissue (Attention: Do not press the tissue against the opening and invert the container!) or transferred to another clean container (metal can or the like). Dispense only the required amount and then reclose the original container immediately. The pretreated surface must be allowed to dry completely before applying the adhesive or sealant.
Storage:
Frost sensitive : no Recommended storage : temperature 5 to 25 °C Shelf life : 24 months
Parameters:
Colour : transparent Odour : of white spirit Density : approx. 0.71 g/cm³
Full technical information can be found in the technical data sheet.
TEROSON VR 10 is a liquid universal pretreatment product. Base of the product is white spirit (aromatic free and low n-hexane content). It contains no chlorinated hydrocarbons; it is not harmful to car paints when used on a short-term basis. TEROSON VR 10 will not inhibit the curing of adhesive/sealants. TEROSON VR 10 is mainly used for pretreatment of substrates prior to application of adhesives and sealants. Accurate pretreatment of surfaces is essential for a perfect adhesion. Depending on the basis of the adhesives and sealants TEROSON VR 10 can also be used for removing of tools and contaminated surfaces. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
Depending on the degree of contamination, size and shape of the parts to be treated, TEROSON VR 10 is applied and wiped off with a non-woven tissue or the like. To prevent contamination of the contents in the original packaging, the product should either be poured onto the tissue (Attention: Do not press the tissue against the opening and invert the container!) or transferred to another clean container (metal can or the like). Dispense only the required amount and then reclose the original container immediately. The pretreated surface must be allowed to dry completely before applying the adhesive or sealant.
Storage:
Parameters:
Full technical information can be found in the technical data sheet.
