LOCTITE 97130, ErgoLOC Valve (pneumatic, hand held dispense valve for pressure-time systems, compatible with low viscosity adhesives)
No.
IDH.444643
Associated products:
- LOCTITE 97009, Integrated Semi-Automatic Dispensing System (8 bar) (IDH.215845)
- LOCTITE EQ RC40 Integrated Dispenser (Integrated semi-automatic dispenser) (IDH.2814025)
- LOCTITE 97236 finger switch for valves 97112 / 97121 / 97130 (IDH.142644)
- LOCTITE 97972, hose 1/4'', 10m (O.D. Black Polyethylene PTFE Lined Fluid Feed Line Tubing) (IDH.142646)
- LOCTITE 97293, Finger Switch for 97112 / 97121 / 97130 Applicator (IDH.531803)
LOCTITE 97130, ErgoLOC Valve (pneumatic, hand held dispense valve for pressure-time systems, compatible with low viscosity adhesives)
Associated products:
- LOCTITE 97009, Integrated Semi-Automatic Dispensing System (8 bar) (IDH.215845)
- LOCTITE EQ RC40 Integrated Dispenser (Integrated semi-automatic dispenser) (IDH.2814025)
- LOCTITE 97236 finger switch for valves 97112 / 97121 / 97130 (IDH.142644)
- LOCTITE 97972, hose 1/4'', 10m (O.D. Black Polyethylene PTFE Lined Fluid Feed Line Tubing) (IDH.142646)
- LOCTITE 97293, Finger Switch for 97112 / 97121 / 97130 Applicator (IDH.531803)
Product description:
The LOCTITE ErgoLoc Valve provides excellent compatibility with a wide range of LOCTITE products including cyanoacrylates. Valve body and stem are all PTFE lined to prevent premature curing. It is suitable for dispensing small drops and beads of low to medium viscosity products up to approx. 10,000 mPas (max. product pressure is 2 bar or 30 psi). The slim ergonomic design reduces hand fatigue. LOCTITE ErgoLoc Valve has been designed specifically for manual dispensing. Combined with a semi-automatic or automatic controller it is suitable for low to medium viscosity adhesives. Further information about the product: biuro@woronko-kleje.pl
Recommended products:
Low viscosity cyanoacrylates, acrylics, anaerobic adhesives, activators and primers.
Features:
Forward closing - avoids air entrapment and potential premature curing of cyanoacrylates Stroke adjustment for fine-tuning dispense characteristics Quantity: 0,005 g up to continuous bead
Parameters:
Weigth: 140 g Air input: 4 - 7 bar (60 - 100 psi), filtered to a max. of 10 μm. Dimensions (W x H x D): Ø 40 x 170 mm
The LOCTITE ErgoLoc Valve provides excellent compatibility with a wide range of LOCTITE products including cyanoacrylates. Valve body and stem are all PTFE lined to prevent premature curing. It is suitable for dispensing small drops and beads of low to medium viscosity products up to approx. 10,000 mPas (max. product pressure is 2 bar or 30 psi). The slim ergonomic design reduces hand fatigue. LOCTITE ErgoLoc Valve has been designed specifically for manual dispensing. Combined with a semi-automatic or automatic controller it is suitable for low to medium viscosity adhesives. Further information about the product: biuro@woronko-kleje.pl
Recommended products:
Low viscosity cyanoacrylates, acrylics, anaerobic adhesives, activators and primers.
Features:
Parameters: