LOCTITE 97009, Integrated Semi-Automatic Dispensing System (8 bar)
No.
IDH.215845
Associated products:
- LOCTITE 97121 (single-acting pinch valve, with spring-assisted closing) (IDH.88650)
- LOCTITE 98013 (Precise diaphragm valve with constant flow control, dedicated to dispensing low and medium viscosity adhesives) (IDH.318654)
- LOCTITE 97112 (pneumatic hand valve (FLEX) with suction function, controlled by foot or hand switch) (IDH.88643)
- LOCTITE 97120, Pressure Regulator and Filter (IDH.88649)
- LOCTITE 97201 (footswitch to initiate dispensing actions in most Loctite controllers) (IDH.88653)
- LOCTITE EQ RC40 Integrated Dispenser (Integrated semi-automatic dispenser) (IDH.2814025)
- LOCTITE 97130, ErgoLOC Valve (pneumatic, hand held dispense valve for pressure-time systems, compatible with low viscosity adhesives) (IDH.444643)
Files to download:
LOCTITE 97009, Integrated Semi-Automatic Dispensing System (8 bar)
Associated products:
- LOCTITE 97121 (single-acting pinch valve, with spring-assisted closing) (IDH.88650)
- LOCTITE 98013 (Precise diaphragm valve with constant flow control, dedicated to dispensing low and medium viscosity adhesives) (IDH.318654)
- LOCTITE 97112 (pneumatic hand valve (FLEX) with suction function, controlled by foot or hand switch) (IDH.88643)
- LOCTITE 97120, Pressure Regulator and Filter (IDH.88649)
- LOCTITE 97201 (footswitch to initiate dispensing actions in most Loctite controllers) (IDH.88653)
- LOCTITE EQ RC40 Integrated Dispenser (Integrated semi-automatic dispenser) (IDH.2814025)
- LOCTITE 97130, ErgoLOC Valve (pneumatic, hand held dispense valve for pressure-time systems, compatible with low viscosity adhesives) (IDH.444643)
Product description:
The The Integrated Semi-Automatic Dispensing System is a compact unit providing time-controlled dispensing when combined with an appropriate LOCTITE dispensing valve. The system provides digital of dispensing tyime within the range 0,1 - 99,9 seconds. The controller can be actuated by a footswitch or finger switch. It is also capable of operating in a continuous mode for bead dispensing applications. The reservoir accommodates LOCTITE bottles in 250 ml, 500 g, 1 litre and 2 kg packages. The semi-automatic Dispensing System is required to be connected to an external electrical and pneumatic supply. Reservoir pressure and dispensing time can be set independently of each other. An uncoverd bottle of LOCTITE product is placed directly into the integrated reservoir, and the reservoir lid is clamped in place. The reservoir is then pressurised using clean, filtered dry air. Air within the reservoir will push down on the liquid in the bottle and force it through the product feedline to the dispensing valve. The amount of product dispensed is controlled by three main factors: The pressure in the reservoir, the length of time the dispensing valve remains, and the dispensing needle size. The empty signal is indicated as blinking text "U" on the digital display of the controller. In addition it is signalled by an audible alarm. Voltage free output signals for empty and ready signalling. These can be connected to a higher ranking controller. Further information about the product: biuro@woronko-kleje.pl
Features:
Integrated design for simple setup and space economy Precision pressure regulator (0,1-0,4 bar) for reliable dispensing, eliminating air pressure fluctuation Timer-controlled solenoid valve for air-actuated applicator Level sensor to give empty warning
Parameters:
Air input: min. 5 bar Air input: max. 10 bar Air output: 0,1 - 4 bar Power Consumption : 25 W Dimensions (W x H x D): 360 x 335 x 235 mm
The The Integrated Semi-Automatic Dispensing System is a compact unit providing time-controlled dispensing when combined with an appropriate LOCTITE dispensing valve. The system provides digital of dispensing tyime within the range 0,1 - 99,9 seconds. The controller can be actuated by a footswitch or finger switch. It is also capable of operating in a continuous mode for bead dispensing applications. The reservoir accommodates LOCTITE bottles in 250 ml, 500 g, 1 litre and 2 kg packages. The semi-automatic Dispensing System is required to be connected to an external electrical and pneumatic supply. Reservoir pressure and dispensing time can be set independently of each other. An uncoverd bottle of LOCTITE product is placed directly into the integrated reservoir, and the reservoir lid is clamped in place. The reservoir is then pressurised using clean, filtered dry air. Air within the reservoir will push down on the liquid in the bottle and force it through the product feedline to the dispensing valve. The amount of product dispensed is controlled by three main factors: The pressure in the reservoir, the length of time the dispensing valve remains, and the dispensing needle size. The empty signal is indicated as blinking text "U" on the digital display of the controller. In addition it is signalled by an audible alarm. Voltage free output signals for empty and ready signalling. These can be connected to a higher ranking controller. Further information about the product: biuro@woronko-kleje.pl
Features:
Parameters: