Try to find the solution
LOCTITE LB 8154 - 400ml (anti-seize lubricant with MoS2, up to 450 °C)
No.
IDH.303135
Price
LOCTITE LB 8154 - 400ml (anti-seize lubricant with MoS2, up to 450 °C)
Product description:
LOCTITE 8154 is a mineral oil based assembly paste with MoS2 which facilitates easy assembly and disassembly of cylindrical parts under severe operating conditions at temperatures up to 450 °C. This product protects components during the running in periods and it assures easy disassembly after severe working conditions at temperatures up to 450 °C. This product is typically used in applications with an operating range of -30 °C to +450 °C. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Shake can thoroughly. Spray from a distance of about 15 to 20 cm onto the area to be treated.
2. Apply to clean parts which need lubricating, avoid excessive lubrication.
Storage:
The product is classified as HIGHLY FLAMMABLE and must be stored in an appropriate manner in compliance with relevantregulations. Do not store near oxidizing agents or combustible materials. Store product in the unopened container in a drylocation. Storage information may also be indicated on the product container labelling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Henkel cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Full technical information can be found in the technical data sheet.
LOCTITE 8154 is a mineral oil based assembly paste with MoS2 which facilitates easy assembly and disassembly of cylindrical parts under severe operating conditions at temperatures up to 450 °C. This product protects components during the running in periods and it assures easy disassembly after severe working conditions at temperatures up to 450 °C. This product is typically used in applications with an operating range of -30 °C to +450 °C. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Shake can thoroughly. Spray from a distance of about 15 to 20 cm onto the area to be treated.
2. Apply to clean parts which need lubricating, avoid excessive lubrication.
Storage:
The product is classified as HIGHLY FLAMMABLE and must be stored in an appropriate manner in compliance with relevantregulations. Do not store near oxidizing agents or combustible materials. Store product in the unopened container in a drylocation. Storage information may also be indicated on the product container labelling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Henkel cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
- Density, ISO 2811-1, at 20 °C, g/ml 0,756
- Consistency, ISO 6743-99, NLGI Class : 1
- Loading Test - 4 ball, ASTM D2596 :
-Weld Load, N : 2,900
-Weld Scar ( 2,900 N), mm : 4 - Wear, 1 hour / 400 N, mm : 0,8
Full technical information can be found in the technical data sheet.
