Try to find the solution
LOCTITE LB 8104 - 1000ml (silicone lubricant, up to 200 °C)
No.
IDH.1652337
Price
Associated products:
LOCTITE LB 8104 - 1000ml (silicone lubricant, up to 200 °C)
Associated products:
Product description:
LOCTITE LB 8104 is a silicone valve and packing grease suitable for use on equipment in the food processing industry. This product is suitable for lubricating plastic and elastomeric components (e.g. valves and joints in hot and cold water systems). May be used to assist fitting of "O" rings. This product is typically used in applications with an operating range of -40 °C to +200 °C. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Apply to clean parts which need lubricating, avoid excessive lubrication. If necessary you can use cleaner LOCTITE SF 7063
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product containerlabeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Full technical information can be found in the product technical sheet.
LOCTITE LB 8104 is a silicone valve and packing grease suitable for use on equipment in the food processing industry. This product is suitable for lubricating plastic and elastomeric components (e.g. valves and joints in hot and cold water systems). May be used to assist fitting of "O" rings. This product is typically used in applications with an operating range of -40 °C to +200 °C. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Apply to clean parts which need lubricating, avoid excessive lubrication. If necessary you can use cleaner LOCTITE SF 7063
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product containerlabeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
- Chemical composition : silicone oil / silica gel
- Color: colorless
- Smell: none
- Density at 20 ° C / ml: 1,0
- NLGI consistency: 2/3
- Working temperature : -50 °C do +200 °C
Full technical information can be found in the product technical sheet.
