The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

Loctite LB 8001-400 ml (mineral oil) spray

przykład użycia
Product description:
LOCTITE 8001 is a multi-purpose penetrating oil for micro mechanisms. It is suitable for the food, pharmaceutical and textile industries. LOCTITE 8001 can penetrate inaccessible mechanisms. It is ideally suited for lubricating valve sealings, collars, chains, hinges, cutting knives in food transport equipment and sewing machines. This product is typically used in applications with an operating range of -17 °C to +120 °C. Further information on the product can be obtained from your local technical department: biuro@woronko-loctite.pl

Directions for use:
1. Shake can thoroughly. Spray from a distance of about 15 to 20 cm onto the area to be treated.
2. Apply to clean parts which need lubricating, avoid excessive lubrication.
3. Do not apply product to equipment while food is being processed or transported.

Storage:
The product is classified as HIGHLY FLAMMABLE and must be stored in an appropriate manner in compliance with relevant regulations. Do not store near oxidizing agents or combustible materials. Store product in the unopened container in a dry location. Storage information may also be indicated on the product container labelling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Henkel cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.

Parameters:
  • Chemical composition : white mineral oil
  • Color : yellow
  • Odor: odorless
  • Density (25°C), g/ml : 0,9
  • Viscosity (20°C), mm²/s : 11
  • Working temperature, °C : od -17 do 120

Full technical information can be found in the technical data sheet

Assortment