The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     
Product description:
With the Rotospray 97115, low medium viscosity LOCTITE products can be applied to the interior cylindrical surfaces of workpieces. The Rotospray is operated in combination with dispensing valves 98009, 97113 or 97135. LOCTITE controller 97152 is used for synchronized control of these units. The special design of drive assembly and rotor housing ensures that the rotorspray is sealed to prevent contamination with adhesive. Rotorspray 97115 is clamped in a fixture. The dispensing needle pointing toward the inside of the wetting holes on the rotor disc. LOCTITE controller 97152 is used for switching the rotorspray ON and OFF and for opening the dispensing valve after the rotor reaches the rated speed. As long as the dispensing valve is open, product is dispensed through the wetting holes of the rotor disc by centrifugal force and uniformly distributed onto the interior cylindrical surface of the part. The rotorspray drive assembly is a spring-loaded design to prevent damage by collision. Further information about the product: biuro@woronko-kleje.pl

Features:
  • Integrated error check, controlled speed and overload shut-off
  • Status of rotorspray indicated by LED's
  • High speed for large and small rotor discs
  • Reduced risk of damage by collision due to spring-loaded design
  • Shor cycle time due to quick-stop capability

    Parameters:
  • Power supply: 24 [VDC]
  • Power consumption: 10 W to 24 W for short periods
  • Dimensions (W x H x D): ⌀ 35/40 x 305 x 70 [mm]
  • Adjustable speed range: 4000-8000 [rpm]
  • Weight: 600 [g]
  • Assortment