The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     
Product description:
LOCTITE 5368 is generally used for sealing applications, but also for bonding and for high temperature protection. It is primarily used in various industrial fields; automotive, household elecrical appliances and aeronautical industry. This product is typically used in applications up to 250 °C. Further information about the product: biuro@woronko-kleje.pl

Steps to achieve the best adhesive results:
1. For best performance bond surfaces should be clean and free from grease. Use LOCTITE SF 7063.
2. Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after the product is dispensed.
3. The bond should be allowed to cure (e.g. seven days), before subjecting to heavy service loads.
4. Excess material can be easily wiped away with non-polar solvents.

Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.

Parameters:
  • Time for full cured at the gap 0,5 mm (23 °C) : 7 days
  • Working temperature : from -60 °C to +250 °C
  • Hardness : 26 Shore A
  • Color : black
  • Tensile strength : 2,2 N/mm²
  • Elongation at break : 435%


Full technical information can be found in the technical data sheet.

Assortment