Try to find the solution
LOCTITE LB 8191 - 400ml (lubricating dry coating, up to 340 °C) spray
No.
IDH.142532
Price
LOCTITE LB 8191 - 400ml (lubricating dry coating, up to 340 °C) spray
Product description:
LOCTITE 8191 is a molybdenum disulfide bonded coating at room temperature. This coating acts as a dry lubricant preventing accumulation of dust or dirt. The coating creates ideal sliding surfaces for free movements on hinges, slipways on conveyor equipment, etc. It also offers corrosion protection to metal surfaces. This product is typically used in applications with an operating range of -40 °C to +340 °C. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Shake can thoroughly. Spray from a distance of about 20 to 30 cm onto the area to be treated.
2. For best results, apply to clean, dry surfaces. For cleaning you can use LOCTITE SF 7063.
Storage:
The product is classified as HIGHLY FLAMMABLE and must be stored in an appropriate manner in compliance with relevant regulations. Do not store near oxidizing agents or combustible materials. Store product in the unopened container in a dry location. Storage information may also be indicated on the product container labelling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Henkel cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Full technical information can be found in the technical data sheet.
LOCTITE 8191 is a molybdenum disulfide bonded coating at room temperature. This coating acts as a dry lubricant preventing accumulation of dust or dirt. The coating creates ideal sliding surfaces for free movements on hinges, slipways on conveyor equipment, etc. It also offers corrosion protection to metal surfaces. This product is typically used in applications with an operating range of -40 °C to +340 °C. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Shake can thoroughly. Spray from a distance of about 20 to 30 cm onto the area to be treated.
2. For best results, apply to clean, dry surfaces. For cleaning you can use LOCTITE SF 7063.
Storage:
The product is classified as HIGHLY FLAMMABLE and must be stored in an appropriate manner in compliance with relevant regulations. Do not store near oxidizing agents or combustible materials. Store product in the unopened container in a dry location. Storage information may also be indicated on the product container labelling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Henkel cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
- Density, ISO 3675 ( 25 °C ), g/ml : 0,75
- Viscosity, DIN CUP 4, seconds 11
- Cure Time ( 20 °C ), minutes : 10
- Tack Free Time, minutes : 5
- Peak Temperature, °C : 400
- Odor : solvent
- Appearance : black
Full technical information can be found in the technical data sheet.
