Try to find the solution
LOCTITE 97102 (semi-automatic controller)
No.
IDH.135550
Price
LOCTITE 97102 (semi-automatic controller)
Product description:
The Semi-Automatic Controller has been designed for precision programming of dispense time and dispense pressure setting; product is dispensed from a separately positioned container. Together with the digital pressure display, a digital timer ranging from 0,04 to 99,9 seconds allows the operator to make pin-point accurate deposits when applying a wide range of fluids from low to high viscosity. The Semi-Automatic Controller 97102 controls the dispensing pressure in the product reservoir and the pneumatic opening of the dispensing valve according to the selected dispensing time. The start signal for dispensing is provided by an external foot switch or finger switch. Error messages are shown on a digital display and are accompanied by an audible alarm. A voltage-free Ready signal is provided as ling as no fault condition exists and when the dispensing cycle is completed. Further information about the product: biuro@woronko-kleje.pl
Features:
Fitted with precision pressure regulator eliminating air pressure fluctuations Digital pressure readout with electronic monitoring Continuous or timed operation modes.
Parameters:
Power supply: 90-260 VAC Power consumption: 40 W Air input: 2-12 bar, filtered to a maximum of 10 µm Air output: 0,1-7 bar Dimensions (W x H x D): 145 x 230 x 260mm Weight: 2,8 kg
The Semi-Automatic Controller has been designed for precision programming of dispense time and dispense pressure setting; product is dispensed from a separately positioned container. Together with the digital pressure display, a digital timer ranging from 0,04 to 99,9 seconds allows the operator to make pin-point accurate deposits when applying a wide range of fluids from low to high viscosity. The Semi-Automatic Controller 97102 controls the dispensing pressure in the product reservoir and the pneumatic opening of the dispensing valve according to the selected dispensing time. The start signal for dispensing is provided by an external foot switch or finger switch. Error messages are shown on a digital display and are accompanied by an audible alarm. A voltage-free Ready signal is provided as ling as no fault condition exists and when the dispensing cycle is completed. Further information about the product: biuro@woronko-kleje.pl
Features:
Parameters:
