LOCTITE SI 5910 BK - 100ml Quick Gasket (oil-resistant silicone flange sealant, black)
No.
IDH.2325872
Associated products:
LOCTITE SI 5910 BK - 100ml Quick Gasket (oil-resistant silicone flange sealant, black)
Associated products:
LOCTITE® SI 5910 BK
Product Description
Moisture-cured, 1-part, thixotropic silicone flange sealant with great resistance to oil and joint movement. Offers a rapid skin-over time.When you need a low-strength, silicone-based, form-in-place gasketing product designed for use on flexible flanges with machined or cast surfaces (metal or plastic), LOCTITE® SI 5910 is a good choice. It is suitable for gaps up to 1 mm (0.039") and offers a cure-through volume (in 24 h) of 2.75 mm (0.108"). Typical applications include stamped sheet metal covers (timing covers and oil sumps). Its thixotropic nature reduces the migration of liquid product after application to the substrate, allowing for reliable quality control, e.g. in dispensing automation as well as manual applications.
Properties
- Typical applications include stamped sheet metal covers (timing covers and oil sumps) where good oil resistance and the ability to withstand high joint-movement is required. The thixotropic nature of LOCTITE® SI 5910® reduces the migration of liquid product after application to the substrate,
- Oil- and joint-movement-resistant,
- For flexible flanges,
- Large gap fill up to 2.75 mm (0.108"),
- Thixotropic for ease of application,
- Available in tubes, cartridges, pressurised cans.
Key Technical Features
| Technology | Silicone |
| Operating temperature | up to +200 ℃ |
| Appearance (uncured) | Black paste |
| Cure | Room temperature vulcanizing (RTV) |
| Specific Benefits | Excellent resistance to automotive engine oils |
| Components | One component - requires no mixing |
| Viscosity | Thixotropic paste |
| Application | Sealing |
| Chemical Type | Oxime silicone |
* Full technical information is available in the product technical data sheet.
Upon request, we provide certificates such as: COA (Certificate of Analysis), COC (Certificate of Conformity), and COO (Certificate of Origin).
