LOCTITE AA 3038 - 50ml (acrylic adhesive)
No.
IDH.1420880
Associated products:
LOCTITE AA 3038 - 50ml (acrylic adhesive)
Associated products:
LOCTITE® AA 3038
Product Description
LOCTITE® AA 3038 is designed primarily to bond e-coated metals (ECS) to glass fibre filled polypropylenes (PPGF) but can also be used on other low energy substrates such as LDPE and HDPE. The product is designed to work without surface pre-treatment. The product contains 0.25 mm fillers for bondline thickness control. The thixotropic nature of LOCTITE® AA 3038 reduces the migration of liquid product after application to the substrate.
Properties
- Thixotropic for ease of application,
- Temperature-resistant up to 100°C,
- Suitable for low-energy plastics,
- No surface pretreatment required.
Key Technical Features
| Technology | Acrylic |
| Chemical Type | Acrylic |
| Appearance, Resin (Component A) | Clear yellow gel |
| Appearance, Hardener (Component B) | Viscous straw colored liquid |
| Components | Two component - requires mixing |
| Viscosity | Medium, thixotropic |
| Cure | Two part acrylic |
| Mix Ratio, by volume - Part A: Part B | 1 : 10 |
| Application | Bonding |
| Specific Benefit | Bonds low energy plastic without pre-treatment |
* Full technical information is available in the product technical data sheet.
Upon request, we provide certificates such as: COA (Certificate of Analysis), COC (Certificate of Conformity), and COO (Certificate of Origin).
