TEROSON PU 8560 - 1L (activator)
No.
IDH.733088
TEROSON PU 8560 - 1L (activator)
Product description:
TEROSON PU 8560 AC-25 is a solvent borne active wipe, which contains silanes. It is free from chlorinated hydrocarbons, aromatic solvents and from isocyanates.
APPLICATION AREAS
TEROSON PU 8560 AC-25 is used for cleaning and activating glass* and ceramic coatings prior to glass bonding without black glass primer.
Directions for use:
TEROSON PU 8560 AC-25 is applied with a clean cloth to the surface. After this wet application it is not allowed to wipe off with a dry cloth. The adhesive can be applied after min. 30 s drying time. TEROSON PU 8560 AC-25 is applied on glass* or ceramic coating, but only in the bonding area. It is not suitable for cleaning of visible areas due to reactive ingredients that may lead to spots and stripes after drying. Contaminations in the visible areas must be removed immediately by using a pure solvent cleaner.
Storage:
Frost sensitive : no Recommended storage temperature : 5 to 25 °C Shelf life : 9 months in original packaging
Parameters:
Colour : colourless to light yellow clear Odour : smells of benzine Density : approx. 0.7 g/cm³ Solids : approx. 1.4 %
Full technical information can be found in the technical data sheet.
TEROSON PU 8560 AC-25 is a solvent borne active wipe, which contains silanes. It is free from chlorinated hydrocarbons, aromatic solvents and from isocyanates.
APPLICATION AREAS
TEROSON PU 8560 AC-25 is used for cleaning and activating glass* and ceramic coatings prior to glass bonding without black glass primer.
Directions for use:
TEROSON PU 8560 AC-25 is applied with a clean cloth to the surface. After this wet application it is not allowed to wipe off with a dry cloth. The adhesive can be applied after min. 30 s drying time. TEROSON PU 8560 AC-25 is applied on glass* or ceramic coating, but only in the bonding area. It is not suitable for cleaning of visible areas due to reactive ingredients that may lead to spots and stripes after drying. Contaminations in the visible areas must be removed immediately by using a pure solvent cleaner.
Storage:
Parameters:
Full technical information can be found in the technical data sheet.
