BONDERITE C-MC 80 - 23kg (yellow-brown liquid strong agent for cleaning workshops and floors, former LOCTITE 7861)
No.
IDH.2586978
BONDERITE C-MC 80 - 23kg (yellow-brown liquid strong agent for cleaning workshops and floors, former LOCTITE 7861)
Product description:
LOCTITE 7861 is a heavy duty workshop and floor cleaner. This product can be used in high pressure and steam jet cleaning devices. LOCTITE 7861 is an efficient heavy duty cleaner for concrete floors, also prior to concrete repair applications. It removes a wide range of soils like fat, grease, oil and dust. The remaining layer provides a temporary corrosion protection. LOCTITE 7861 is not recommended for light metals like aluminium. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. LOCTITE 7861 is to be applied by using high pressure cleaner or steam jet equipment:
● Working concentration: 0.5 to 2%.
● Cleaning Temperature: 20 to 100°C.
● Spraying pressure: 10 to 100 bar.
2. The remaining thin layer prevents against flash rust and can be removed with water prior to the next process step.
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Chemical type : alkaline cleaner Appearance : yellow-brown liquid Viscosity : low Density at 20 °C : 1,16 pH for 10 g/l : 12,2
Full technical information can be found in the technical data sheet
LOCTITE 7861 is a heavy duty workshop and floor cleaner. This product can be used in high pressure and steam jet cleaning devices. LOCTITE 7861 is an efficient heavy duty cleaner for concrete floors, also prior to concrete repair applications. It removes a wide range of soils like fat, grease, oil and dust. The remaining layer provides a temporary corrosion protection. LOCTITE 7861 is not recommended for light metals like aluminium. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. LOCTITE 7861 is to be applied by using high pressure cleaner or steam jet equipment:
● Working concentration: 0.5 to 2%.
● Cleaning Temperature: 20 to 100°C.
● Spraying pressure: 10 to 100 bar.
2. The remaining thin layer prevents against flash rust and can be removed with water prior to the next process step.
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Full technical information can be found in the technical data sheet
