TEROSON VR 190 -10l (brake cleaner) / BREMSEN
No.
IDH.840759
TEROSON VR 190 -10l (brake cleaner) / BREMSEN
Product description:
TEROSON VR 190 is a multipurpose, solvent based product, formulated for the removal of grease, oil and dirt. The cleaner is free of halogenated hydrocarbons. TEROSON VR 190 is also available in aerosol cans, using carbon dioxide as a propellant. TEROSON VR 190 removes grease and oil from all parts, e.g. brakes, clutches and transmissions. It also removes adhesive and sealant residues from motor, carburettor and transmission flanges prior to the application of new sealant. The cleaner can also be used to remove hardened grease from hinges and joints prior to renewed greasing. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
For occasional use TEROSON VR 190 is applied from the handy aerosol can. For a larger scale, use the convenientpump spray bottle, which can be filled from the 10 l tin. The bottle is filled by removing the pump top and filling the container with TEROSON VR 190 (please assure that the ”max“ line is not exceeded). The top of the pump is replaced and firmly screwed to the container. Pump bottle 30 times until release valve becomes audible. The spray jet can be adjusted by twisting the nozzle. The bottle must not remain under pressure for longer than necessary for application; empty container prior to long-term storage. The parts to be cleaned are thoroughly soaked with TEROSON VR 190, and the excess allowed to drip-off. The fast evaporating solvent and the pressure of the spray jet lead to a combined chemical and mechanical cleaning. Avoid excessive application to painted areas, plastics and rubber. Do not spray on brake hoses. The product must not be sprayed on electrical contacts because of its flammability.
Storage:
Frost sensitive : no Recommended storage temperature : 10 to 25 °C Shelf life : 18 months
Parameters:
Colour : colourless, transparent Odour : of solvents Density : approx. 0.73 g/cm³ In service temperature : 5 to 35 °C Aerosol propellant : carbone dioxide
Full technical information can be found in the technical data sheet.
TEROSON VR 190 is a multipurpose, solvent based product, formulated for the removal of grease, oil and dirt. The cleaner is free of halogenated hydrocarbons. TEROSON VR 190 is also available in aerosol cans, using carbon dioxide as a propellant. TEROSON VR 190 removes grease and oil from all parts, e.g. brakes, clutches and transmissions. It also removes adhesive and sealant residues from motor, carburettor and transmission flanges prior to the application of new sealant. The cleaner can also be used to remove hardened grease from hinges and joints prior to renewed greasing. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
For occasional use TEROSON VR 190 is applied from the handy aerosol can. For a larger scale, use the convenientpump spray bottle, which can be filled from the 10 l tin. The bottle is filled by removing the pump top and filling the container with TEROSON VR 190 (please assure that the ”max“ line is not exceeded). The top of the pump is replaced and firmly screwed to the container. Pump bottle 30 times until release valve becomes audible. The spray jet can be adjusted by twisting the nozzle. The bottle must not remain under pressure for longer than necessary for application; empty container prior to long-term storage. The parts to be cleaned are thoroughly soaked with TEROSON VR 190, and the excess allowed to drip-off. The fast evaporating solvent and the pressure of the spray jet lead to a combined chemical and mechanical cleaning. Avoid excessive application to painted areas, plastics and rubber. Do not spray on brake hoses. The product must not be sprayed on electrical contacts because of its flammability.
Storage:
Parameters:
Full technical information can be found in the technical data sheet.
