The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     
Product description:
TECHNOMELT AS 9268 H is a hotmelt adhesive, based on EVA-Copolymer which, when the recommended processing temperature is adhered to, excels in a particularly pronounced thermal stability in the hot melt. The product has a very good “hot tack”, a short setting time and is almost odourless.

Application Areas:
TECHNOMELT AS 9268 H is used for the manual bonding of cardboards, wood and wooden materials, leather, fabric, different plastics, as well as aluminium and steel. Further information about the product: biuro@woronko-kleje.pl

Directions for use:
Preliminary Statement:
Prior to application it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.See also "General Instructions for the Application of Hotmelts". Recommended working temperature: 170 to 190 °C.While processing, take care to maintain a gentle thermal load by keeping to the recommended working temperature, sinceprolonged overheating or too often repeated melting will inevitably entail quality changes in the adhesive. The statedprocessing temperatures are standard values which, according to the processing method, may vary within certainlimits.

Storage:
  • Shelf-life (in unopened original packaging), months : 24
  • Recommended Storage Temperature, °C : 10 to 20
  • Frost-Sensitive : No

    Parameters:
  • Solids Content, %: 100
  • Viscosity, Brookfield, mPas 160 °C, Spindle 27 : 22,500 to 31,500
  • Density, g/cm³ : ~1.0
  • Softening Point, Ring & Ball, °C : 80 to 90
  • Application Temperature, °C : 170 to 190

    Full technical information can be found in technical data sheet.
  • Assortment