LOCTITE 97121 (single-acting pinch valve, with spring-assisted closing)
No.
IDH.88650
Associated products:
- Repair kit LOCTITE 97217 for valve 97121 d = 1.7 mm (black PTFE tubing) (IDH.114348)
- LOCTITE 97009, Integrated Semi-Automatic Dispensing System (8 bar) (IDH.215845)
- LOCTITE EQ RC40 Integrated Dispenser (Integrated semi-automatic dispenser) (IDH.2814025)
- LOCTITE 97293, Finger Switch for 97112 / 97121 / 97130 Applicator (IDH.531803)
- LOCTITE 97236 finger switch for valves 97112 / 97121 / 97130 (IDH.142644)
LOCTITE 97121 (single-acting pinch valve, with spring-assisted closing)
Associated products:
- Repair kit LOCTITE 97217 for valve 97121 d = 1.7 mm (black PTFE tubing) (IDH.114348)
- LOCTITE 97009, Integrated Semi-Automatic Dispensing System (8 bar) (IDH.215845)
- LOCTITE EQ RC40 Integrated Dispenser (Integrated semi-automatic dispenser) (IDH.2814025)
- LOCTITE 97293, Finger Switch for 97112 / 97121 / 97130 Applicator (IDH.531803)
- LOCTITE 97236 finger switch for valves 97112 / 97121 / 97130 (IDH.142644)
Product description:
The Pinch Valve Applicator provides excellent compatibility with all LOCTITE products, in particular cyanoacrylates. It can dispense small drop sizes of low to medium viscosity products. This ergonomically designed applicator with pistol grip eliminates hand fatigue. Ease of feedline replacement offers customers a high degree of flexibility for changeover to a diffrent product. The PTFE product feedline of the Pinch Valve is protected by an addinitional outer tubing. A single acting cylinder is used as actuator. The Pinch Valve Applicator is closed in idle position. The product feedline is closed and pinched off by the cylinder piston of the actuator assembly. The Pinch Valve Applicator can be mounted on the reservoir lid or be used as a stationary applicator unit. Further information about the product: biuro@woronko-kleje.pl
Recommended products:
Cyanoacrylates, acrylics, anaerobic and light curable adhesives, activators and primers.
Features:
Easy assembly of the valve onto the reservoir lid Lightweight design achieves comfortable handling of the applicator pencil
Parameters:
Air input: min. 5 bar (72 psi), filtered to a max. of 10 µm Dimensions (W x H x D): 120 x 97 x 32 mm Applicator pencil: Ø 28,5 x 162 mm Valve: 240 g Pistol grip: 100 g
The Pinch Valve Applicator provides excellent compatibility with all LOCTITE products, in particular cyanoacrylates. It can dispense small drop sizes of low to medium viscosity products. This ergonomically designed applicator with pistol grip eliminates hand fatigue. Ease of feedline replacement offers customers a high degree of flexibility for changeover to a diffrent product. The PTFE product feedline of the Pinch Valve is protected by an addinitional outer tubing. A single acting cylinder is used as actuator. The Pinch Valve Applicator is closed in idle position. The product feedline is closed and pinched off by the cylinder piston of the actuator assembly. The Pinch Valve Applicator can be mounted on the reservoir lid or be used as a stationary applicator unit. Further information about the product: biuro@woronko-kleje.pl
Recommended products:
Cyanoacrylates, acrylics, anaerobic and light curable adhesives, activators and primers.
Features:
Parameters: