BONDERITE C-MC 118 - 23kg (cleaner for high pressure applications, concentrate, former LOCTITE 7018)
No.
IDH.2570767
Product description:
LOCTITE SF 7018 is a very efficient heavy duty cleaner for metal mechanical parts made of iron or light metals like aluminium. This product is used for high pressure applications. LOCTITE SF 7018 provides good foaming properties and temporary corrosion protection. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. To apply LOCTITE SF 7018 by using high pressure equipment, use 0.5 to 2% concentration.
2. To apply LOCTITE SF 7018 by using foam generating machines, use 20 to 50% concentration. Apply onto the substrate to be cleaned, let it act for 5 to 10 minutes and then rinse off with high pressure clear water.
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Appearance: clear liquid Viscosity : low Density at 20 °C : 1,07 pH for 10 g/l : 11 Cleaning temperature : ≤80 °C
Full technical information can be found in the technical data sheet.
LOCTITE SF 7018 is a very efficient heavy duty cleaner for metal mechanical parts made of iron or light metals like aluminium. This product is used for high pressure applications. LOCTITE SF 7018 provides good foaming properties and temporary corrosion protection. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. To apply LOCTITE SF 7018 by using high pressure equipment, use 0.5 to 2% concentration.
2. To apply LOCTITE SF 7018 by using foam generating machines, use 20 to 50% concentration. Apply onto the substrate to be cleaned, let it act for 5 to 10 minutes and then rinse off with high pressure clear water.
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Full technical information can be found in the technical data sheet.