LOCTITE 97118, Advancing slide (50 mm)
No.
IDH.142636
Associated products:
- LOCTITE 97113 (stationary, precise dispense valve with suction function and 1/4" connection for low or medium viscosity products) (IDH.88644)
- LOCTITE 97114 (stationary, precise dispense valve with suction function and 3/8" connection for high viscosity products) (IDH.88645)
- LOCTITE 97115 (electric rotorspray, used to apply products to the inner cylindrical surfaces of workpieces) (IDH.135557)
LOCTITE 97118, Advancing slide (50 mm)
Associated products:
- LOCTITE 97113 (stationary, precise dispense valve with suction function and 1/4" connection for low or medium viscosity products) (IDH.88644)
- LOCTITE 97114 (stationary, precise dispense valve with suction function and 3/8" connection for high viscosity products) (IDH.88645)
- LOCTITE 97115 (electric rotorspray, used to apply products to the inner cylindrical surfaces of workpieces) (IDH.135557)
Product description:
The advancing slide system consists of a pneumatic double acting, dual piston cylinder. The mounting bracket eases precise positioning of either valves or rotorsprays. Additionally the system is equipped with 2 integrated limit switches that provide position sensing when connected to a controller. The forward movement of the advancing slide is initiated by the start signal. The LOCTITE controller 97152 controls the forward and backward movement of the advancing slide. The magnetic field of a permanent magnet located on both pistons of the pneumatic cylinder effects contactless actuation of the electrical proximity switches at their end positions, initiating the start of dispensing. Further information about the product: biuro@woronko-kleje.pl
Features:
Allows simple and precise positioning of valves and rotorsprays Air flow controls to adjust advance and retract speed Easy installation with automatic controllers 97152 Reed switch with 4-pin M12 circular connectors for sensing the two end positions
Parameters:
Air supply: min 4 bar, filtered to a max. of 30 μm Max. Stroke: 50 mm Dimensions (W x H x D): 80 x 65 x 30 mm
The advancing slide system consists of a pneumatic double acting, dual piston cylinder. The mounting bracket eases precise positioning of either valves or rotorsprays. Additionally the system is equipped with 2 integrated limit switches that provide position sensing when connected to a controller. The forward movement of the advancing slide is initiated by the start signal. The LOCTITE controller 97152 controls the forward and backward movement of the advancing slide. The magnetic field of a permanent magnet located on both pistons of the pneumatic cylinder effects contactless actuation of the electrical proximity switches at their end positions, initiating the start of dispensing. Further information about the product: biuro@woronko-kleje.pl
Features:
Parameters: