The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

TEROSON VR 4600 - 400ml (farba cynkowa)

TEROSON VR 4600 - 400ml (farba cynkowa)  (IDH.333170)

Product description:
TEROSON VR 4600 is a sprayable, rapid curing zinc dust corrosion protection primer in an aerosol based on zinc, with an epoxy bonding agent. The material provides optimal protection against corrosion for iron and steel as a result of its electro-chemical interaction. The dry film bonds well to cleaned metal parts and features a high resistance to abrasive wear. It also conducts electricity, in dry conditions. As a result of its self-healing properties TEROSON VR 4600 is able to close small lesions and hence offer lasting protection for the steel surfaces.

Application Areas:
TEROSON VR 4600 is used in vehicle bodywork repairs to galvanize welding points and the joints of those parts which were originally galvanized, in particular those which will not be painted. TEROSON VR 4600 also serves as corrosion protection between welding flanges during MIG and spot welding (20 - 30 μm dryfilm thickness). TEROSON VR 4600 is used in structural steel engineering, in equipment, machinery, boat and appliances manufacture. It is particularly applied when high requirements for corrosion protection and mechanical strain are demanded. Further information about the product: biuro@woronko-kleje.pl

Directions for use:
Application:
The material should have room temperature at time of application. Shake can well, continuing for 1 minute after the ball-bearing becomes audible. Hold can vertically while spraying and apply in two to three crossing patterns at a distance of about 20 to 30 cm.After use the can should be inverted and the spray activated until the jet is cleared and only propellent is emitted.

Drying:
Both air-drying and oven drying are possible. Where air-drying is used the ambient temperature, the effective metal temperature and also the relative humidity can affect drying times. Forced oven drying assists curing.

Storage:
  • Frost sensitive : no
  • Recommended storage temperature : 10 to 25 °C
  • Shelf life : 18 months in original packaging

    Parameters:
  • Colour: grey
  • Odour : of solvents
  • Density: approx. 1.0 g/cm³
  • Drying time : approx. 30 min.
  • Corrosion resistance salt primer test DIN 50021 (35°C, salt solution 5%,1000h) : no corrosion
  • Dry-film thickness : 50 μm
  • Adhesion : acc. to DIN 53151 Cross cut characteristic value GT 0-1
  • Cleaning : Acetone or TEROSON D
  • In service temperature and temperature resistance : -50 to 500 °C (primer fully dried)

    Further information can be found in technical data sheet
  • Assortment