LOCTITE 97135, Diaphragm Valve, 2 mm Orifice
No.
IDH.215846
Associated products:
- LOCTITE 97233 (Luer-Lok, Adapter Kit (20 Luer-Loks, 5 Adapters)) (IDH.88672)
- LOCTITE 97136, Diaphragm Valve, 3 mm Orifice (IDH.215848)
- LOCTITE 97115 (electric rotorspray, used to apply products to the inner cylindrical surfaces of workpieces) (IDH.135557)
- LOCTITE 97972, hose 1/4'', 10m (O.D. Black Polyethylene PTFE Lined Fluid Feed Line Tubing) (IDH.142646)
LOCTITE 97135, Diaphragm Valve, 2 mm Orifice
Associated products:
- LOCTITE 97233 (Luer-Lok, Adapter Kit (20 Luer-Loks, 5 Adapters)) (IDH.88672)
- LOCTITE 97136, Diaphragm Valve, 3 mm Orifice (IDH.215848)
- LOCTITE 97115 (electric rotorspray, used to apply products to the inner cylindrical surfaces of workpieces) (IDH.135557)
- LOCTITE 97972, hose 1/4'', 10m (O.D. Black Polyethylene PTFE Lined Fluid Feed Line Tubing) (IDH.142646)
Product description:
In combination with a semi-automatic or automatic controller, Diaphgram Valves are suitable for dispensing all low (97135) to medium (97136) viscosity anaerobic and UV light curable adhesives. All wetted components inside the valve are PTFE to prevent premature curing. The valve has a simple design that facilitates cleaning, servicing and diaphgram replacement. The opening of the diagram takes place by pressurising an internal single-acting cylinder. When in indle position, the valve is held closed by spring pressure. Sealing in idle position is achieved by an internal spring pushing a piston against the diaphgram, re-seating the diaphgram over the flow path. The diaphgram valve is not suitable for moisture sensitive products like CAs. Further information about the product: biuro@woronko-kleje.pl
Recommended products:
Acrylics, anaerobic adhesives and light curable adhesives
Features:
Modular design of valve body and valve actuator provides on-line serviceability SImple design, cost effective Easy to service
Parameters:
Air input: min. 5 - max. 7 bar (73 psi - 100 - psi) Product Outlet: Luer-Lock output fitting Max. Product Pressure: 4 bar (60 psi) Dimensions (W x H x D): Ø 32 x 127 mm Weight: 300 g
In combination with a semi-automatic or automatic controller, Diaphgram Valves are suitable for dispensing all low (97135) to medium (97136) viscosity anaerobic and UV light curable adhesives. All wetted components inside the valve are PTFE to prevent premature curing. The valve has a simple design that facilitates cleaning, servicing and diaphgram replacement. The opening of the diagram takes place by pressurising an internal single-acting cylinder. When in indle position, the valve is held closed by spring pressure. Sealing in idle position is achieved by an internal spring pushing a piston against the diaphgram, re-seating the diaphgram over the flow path. The diaphgram valve is not suitable for moisture sensitive products like CAs. Further information about the product: biuro@woronko-kleje.pl
Recommended products:
Acrylics, anaerobic adhesives and light curable adhesives
Features:
Parameters: