The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

TEROSON Bond Glass Cleaner - 1l (Glass and plastic cleaner)

TEROSON Bond Glass Cleaner - 1l (Glass and plastic cleaner) (IDH.2689820 )

Product description:
TEROSON® BOND GLASS CLEANER is suitable for all surfaces of the vehicle, especially glass and plexiglas. Removes dust, dirt and all common contaminants and evaporates to a streak- and residue-free shine. Apply with a lint-free cloth. In combination with TEROSON BOND SPONGE, it is ideal to efficiently clean the bondline prior to windscreen bonding. Typical applications include the bonding of front, rear and side screens to the body of passenger-, utility-, special- and rail vehicles. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
TEROSON® BOND GLASS CLEANER is applied directly on the windscreen and wiped off in one direction with a clean lint free cloth.The bondline should be ideally prepared in combination with the wetted TEROSON® BOND SPONGE by wiping back and forth to achieve best preparation. The pretreatment products / adhesives can be applied after evaporation.
Storage:
Store product in the unopened container in a dry location. Storage information may also be indicated on the product container labelling. Optimal Storage: 5 to 30 °C. Storage below 5 °C or greater than 30 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Henkel representative.
Parameters:
  • Technology : Glass cleaner
  • Chemical Type : Water based tensides
  • Appearance (uncured) : Bluish liquid
  • Components : One-component – requires no mixing
  • Viscosity : Liquid
  • Cure : Not applicable
  • Application : Surface preparation
  • Environmental temperature at application : -5 to 45°C (23 to 113°F)
  • Material application temperature : 5 to 35°C (41 to 95°F)
  • Specific Benefits:
    - High cleaning properties in combination with TEROSON® BOND SPONGE
    - Solvent free
    - Simple process

    Further information about product can be found in technical data sheet
  • Assortment