The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

TEROSON SB 3140 BK - 500ml spray(anti-stone protection, black)

No.

IDH.787643

TEROSON SB 3140 BK - 500ml spray(anti-stone protection, black)

TEROSON SB 3140 BK - 500ml spray(anti-stone protection, black) (IDH.787643)

Product description:
TEROSON SB 3140 is a finely sprayable coating material based on synthetic resins. The dry film provides excellent adhesion to cleaned underbodies, to bare metal and painted surfaces, high covering capaticity, goof corrosion protection and highabrasion resistance,resulting in good road stone antichip characteristics. TEROSON SB 3140 can be painted with standard vehicle paint systems after about 15 minutes. For best results, painting should be done within 6 hour(s) after product application. Oven drying at ca. 60°C is possible without problems. As a general rule, mechanical stress (e.g. the usw of a car wash facility) is to be avoided during the first few weeks. Please also consult the product information of the paint manufacturer for the mechanical resistance of the overpainted surface. Further information about the product: biuro@woronko-kleje.pl

Directions for use:
The material should be at room temperature at the time of application. Shake the can well, continuing for 1 min. after the ball/bearing becomes audible. Hold can vertically while spraying and apply in two three crossing patterns at a distance of about 20 to 30 cm. If masking tape has been used, alwazs remove it before the material begins to dry. Abrassion resistance and corrosion protection increase with the layer of thickness. For that reason the spray application should be repeated once or twice after a short flash-off time. In order to avoid bare patches, the material should be sprayed in criss-cross fashion. After use, turn the spray tin upside down and operate the valve until nothing but propellant gas emerges.

Storage:
  • Shelf-life (in unopened original packaging), months :18
  • Recommended Storage Temperature, °C : 10 to 25

    Parameters:
  • Colour : light, black
  • Odour : of solvents
  • Density : approx. 0.93 g/cm³
  • Solids of the active ingredient : approx. 55 %
  • Layer thickness dry film (2-3 crossing patterns) : 250 to 300 µm
  • Drying time approx. : 2 h
  • Application temperature : 15 to 25 °C
  • In service temperature range : -20 to 70 °C
  • Short exposure (up to 1 h) : 100 °C

    Full technical information can be found in the technical data sheet
  • Assortment