BONDERITE C-MC 352 - 23kg (spray, solvent-free cleaner for mechanical parts, former LOCTITE 7014)
No.
IDH.2551003
BONDERITE C-MC 352 - 23kg (spray, solvent-free cleaner for mechanical parts, former LOCTITE 7014)
Product description:
LOCTITE 7014 is an efficient metal cleaner and degreaser used in spray cleaning machines providing strong detergent efficiency. For degreasing of all types of metals including light metals e.g. aluminium. LOCTITE 7014 is a liquid cleaning product that can be added by automatic dosing system. This product does not foam at temperatures >50 °C. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
1. LOCTITE 7014 is to be applied by spray equipment:
● Working concentration: 2 to 6%.
● Cleaning Temperature: 50 to 75°C.
● Treatment time (degreasing): 1 to 5 minutes.
● Treatment time (renovation): 10 to 15 minutes.
● Spraying pressure: 1.5 to 2.5 bar
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Density at 20 °C : 1.2 pH at 10 g/l : 11.5 Chemical type : alkaline cleaner Appearance : light yellow Viscosity : low
Full technical information can be found in the technical data sheet
LOCTITE 7014 is an efficient metal cleaner and degreaser used in spray cleaning machines providing strong detergent efficiency. For degreasing of all types of metals including light metals e.g. aluminium. LOCTITE 7014 is a liquid cleaning product that can be added by automatic dosing system. This product does not foam at temperatures >50 °C. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
1. LOCTITE 7014 is to be applied by spray equipment:
● Working concentration: 2 to 6%.
● Cleaning Temperature: 50 to 75°C.
● Treatment time (degreasing): 1 to 5 minutes.
● Treatment time (renovation): 10 to 15 minutes.
● Spraying pressure: 1.5 to 2.5 bar
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Full technical information can be found in the technical data sheet
