TEROSON SB 450 - 1l (cleaning agent and primer for difficult-to-bond surfaces)
No.
IDH.642844
TEROSON SB 450 - 1l (cleaning agent and primer for difficult-to-bond surfaces)
Product description:
TEROSON SB 450 is an alcoholic solution designed for the cleaning of difficult to bond surfaces. It contains active ingredients that improve the adhesion of elastic adhesives and sealants on surfaces on which adhesion is usually difficult to achieve.
Application Areas:
TEROSON SB 450 is used for cleaning and if necessary to improve adhesion of elastic adhesives and sealants on metals, plastics and coated surfaces. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
A thorough cleaning of the substrates is essential to achieve a serviceable adhesion on metals, plastics and coated surfaces. TEROSON SB 450 is applied finely and evenly by a suitable clean cloth or paper. The cloth or paper should be changed by apparent contamination. In order to control whether TEROSON SB 450 covers the entire substrate, the product contains a UV indicator. It is particularly well visible under a UV lamp with a wave length of approx. 380 nm. After withdrawal of the product, the container should be closed tightly to prevent access of humidity. By exposure to water/humidity TEROSON SB 450 loses its activity and becomes cloudy.
Storage:
Shelf life: Frost-Sensitive : no Recommended storage temperature, °C : 10 to 25 Shelf-life (in unopened original packaging), months : 12
Parameters: Product type : alcoholic solution Components : one-component Application : surface treatment Appearance: colourless, clear Consistency : thin fluid Odor : alcoholic Density, g/cm³ : approx. 0.8 Flash-off time, min : 10 to 60
Further information can be found in technical data sheet
TEROSON SB 450 is an alcoholic solution designed for the cleaning of difficult to bond surfaces. It contains active ingredients that improve the adhesion of elastic adhesives and sealants on surfaces on which adhesion is usually difficult to achieve.
Application Areas:
TEROSON SB 450 is used for cleaning and if necessary to improve adhesion of elastic adhesives and sealants on metals, plastics and coated surfaces. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
A thorough cleaning of the substrates is essential to achieve a serviceable adhesion on metals, plastics and coated surfaces. TEROSON SB 450 is applied finely and evenly by a suitable clean cloth or paper. The cloth or paper should be changed by apparent contamination. In order to control whether TEROSON SB 450 covers the entire substrate, the product contains a UV indicator. It is particularly well visible under a UV lamp with a wave length of approx. 380 nm. After withdrawal of the product, the container should be closed tightly to prevent access of humidity. By exposure to water/humidity TEROSON SB 450 loses its activity and becomes cloudy.
Storage:
Parameters:
Further information can be found in technical data sheet
